DR1F9M-AA1ULL-ENG
DVD RECORDER
OWNER’S MANUAL
MODEL: DR1F9H
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
Call us and we will
guide you through
your first recording,
for free.
1-800-243-0000
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S
MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE
REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following
procedures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions. - All these safety and
operating instructions should be read before the
product is operated.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the product.
2. Keep these instructions. - The safety, operating
and use instructions should be retained for future
reference.
11. Only use attachments/accessories specified
by the manufacturer.
3. Heed all warnings. - All warnings on the product
and in the operating instructions should be adhered
to.
4. Follow all instructions. - All operating and use
instructions should be followed.
5. Do not use this product near water. – For
example: near a bath tub, wash bowl, kitchen sink,
laundry tub, in a wet basement; or near a
swimming pool; and other areas located near
water.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with apparatus. When a cart is used, use
caution when moving the cart/product
6. Clean only with dry cloth. – Unplug this product
from the wall outlet before cleaning. Do not use
liquid cleaners.
combination to avoid injury from tip-over.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions. -
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over- heating. The
openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
13. Unplug this product during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
product has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the product, the product has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
3
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25-32
General Playback Features . . . . . . . . . . . . .25-28
Playing a DivX Movie File . . . . . . . . . . . . . . . . .29
Playing an Audio CD or MP3/WMA file . . . . . . .30
Viewing a JPEG File . . . . . . . . . . . . . . . . . .31-32
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-10
Symbol Used in this Manual . . . . . . . . . . . . . . . .5
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .5
Recordable and Playable Discs . . . . . . . . . . . . .6
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . .7
Regional Code . . . . . . . . . . . . . . . . . . . . . . . . . .7
Card useable on this unit . . . . . . . . . . . . . . . . . . . .8
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .10
Remote Control Operation . . . . . . . . . . . . . . . .10
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . .33-38
About DVD recording . . . . . . . . . . . . . . . . . .33-34
Basic Recording from a TV . . . . . . . . . . . . . . . .35
Instant Timer Recording . . . . . . . . . . . . . . . . . .35
Playing while you are recording . . . . . . . . . . . .35
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . .36
Checking Timer Recording Details . . . . . . . . . .37
Recording from an External Input . . . . . . . . . . .37
Recording from DV Input . . . . . . . . . . . . . . . . .38
Hookup and Settings . . . . . . . . . . . . . . . . . . . .11-24
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Connecting an Antenna or Cable TV . . . . . . . . .12
Connections to Your TV . . . . . . . . . . . . . . . . . .13
HDMI connection . . . . . . . . . . . . . . . . . . . . . . .14
Connecting to an Amplifier . . . . . . . . . . . . . . . .15
Accessory Audio/Video (A/V) Connections . . . .16
Auto Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Using the Home Menu . . . . . . . . . . . . . . . . . . .17
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . .18
General Operation . . . . . . . . . . . . . . . . . . . .18
General Settings . . . . . . . . . . . . . . . . . . . . .18-19
Tuning Band Select . . . . . . . . . . . . . . . . . . .18
Auto Channel Set . . . . . . . . . . . . . . . . . . . .18
To Add or Erase Channels . . . . . . . . . . . . . .18
Auto Clock Set . . . . . . . . . . . . . . . . . . . . . .19
Manual Clock Set . . . . . . . . . . . . . . . . . . . .19
TV Aspect . . . . . . . . . . . . . . . . . . . . . . . . . .19
Power Save Mode . . . . . . . . . . . . . . . . . . . .19
Factory Set . . . . . . . . . . . . . . . . . . . . . . . . .19
Language Settings . . . . . . . . . . . . . . . . . . . . . .20
Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . .20
Dolby Digital / DTS / MPEG . . . . . . . . . . . .20
Sampling Frequency . . . . . . . . . . . . . . . . . .20
DRC (Dynamic Range Control) . . . . . . . . . .20
Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Lock (Parental Control) Settings . . . . . . . . . .21-22
Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Set Password / Area Code . . . . . . . . . . . . .21
Recording Settings . . . . . . . . . . . . . . . . . . . . . .22
Disc Record Mode . . . . . . . . . . . . . . . . . . . .22
DV Recording Audio . . . . . . . . . . . . . . . . . .22
Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . .22
Disc Settings . . . . . . . . . . . . . . . . . . . . . . . .22-23
Initialize . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Finalize . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Disc Label / Disc Protect . . . . . . . . . . . . . . .23
PBC / Auto Play . . . . . . . . . . . . . . . . . . . . .23
DivX Registration Code . . . . . . . . . . . . . . .23
General Explanation of On-Screen Display . . . .24
Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39-45
Title List and Chapter List Menu Overview . . . .39
VR Mode: Original and Playlist Editing . . . . . . .40
Adding Chapter Markers . . . . . . . . . . . . . . . . .40
Changing Title Thumbnails . . . . . . . . . . . . . . . .40
Making a New Playlist . . . . . . . . . . . . . . . . . . . .41
Adding Additional Title/Chapters to the Playlist .41
Deleting an Original or Playlist Title/Chapter . . .42
Deleting a Part . . . . . . . . . . . . . . . . . . . . . . . . .42
Naming a Title . . . . . . . . . . . . . . . . . . . . . . . . .43
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . .43
Divide One Titles Into Two . . . . . . . . . . . . . . . .44
Combining Two Chapters Into One . . . . . . . . . .44
Moving a Playlist Chapter . . . . . . . . . . . . . . . . .45
Hide a Chapter/Title . . . . . . . . . . . . . . . . . . . . .45
Protect a Title . . . . . . . . . . . . . . . . . . . . . . . . . .45
Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . .46-51
Additional Information . . . . . . . . . . . . . . . . . . . .46
Overwriting Recording . . . . . . . . . . . . . . . . .46
Viewing Title List menu displayed on other
DVD Recorders or Players . . . . . . . . . . . . .46
Playing Your Recordings on Other DVD
Players (Finalizing a Disc) . . . . . . . . . . . . . .46
Language Codes . . . . . . . . . . . . . . . . . . . . . . .47
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Controlling Your TV with the Supplied
Universal Remote Control . . . . . . . . . . . . . . . .48
Troubleshooting . . . . . . . . . . . . . . . . . . . . . .49-50
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .51
4
Notes on Discs
Introduction
To ensure proper use of this product, please read this
owner’s manual carefully and retain for future
reference.
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
This manual provides information on the operation
and maintenance of your recorder. Should the unit
require service, contact an authorized service location.
About the Symbol Display
“
” may appear on your TV display during
operation and indicates that the function explained in
this owner’s manual is not available on that specific
media.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Symbol Used in this Manual
Cleaning Discs
Note:
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Indicates special notes and operating features.
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols
are applicable only to the disc represented by the
symbol.
DVD ALL All DVD discs listed below.
RAM DVD-RAM disc
VR
-RW
DVD-RW with VR recording mode
DVD-RW with Video recording mode
Video
-RW
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
+RW DVD+RW disc
-R DVD-R disc
+R DVD+R (DL) disc
DVD DVD-Video disc
VCD Video CDs
ACD Audio CDs
DivX DivX files
Moisture Condensation
Never operate this product immediately after
moving it from a cold location to a warm location.
Leave it for two or three hours without operating it.
If you use this product in such a situation, it may
damage discs and internal parts.
MP3 MP3 files
WMA WMA files
JPEG JPEG files
5
Recordable and Playable Discs
DVD-RW (Digital Video Disc - ReWritable):
ꢀ DVD-RW discs can be formatted for VR mode recording or Video mode recording.
ꢀ These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again
on the same Disc.
[VR mode]
ꢀ Recordings can be extensively edited
ꢀ Playable only on VR mode compatible players (after finalization)
[Video mode]
ꢀ Playable on regular DVD players (after finalization)
ꢀ Limited editing features
DVD-R (Digital Video Disc - Recordable)
ꢀ
These Discs can be recorded only once. After you finalize a DVD-R, you cannot record on it or edit it.
ꢀ DVD-R discs can be only formatted to Video mode.
ꢀ Playable on regular DVD players (after finalization)
ꢀ Limited editing features
DVD-RAM (DVD - Random Access Memory)
ꢀ DVD-RAM discs can be formatted for VR mode recording.
ꢀ
These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on
the same Disc.
ꢀ Playable on DVD-RAM compatible players.
ꢀ Recordings can be extensively edited.
ꢀ Only DVD-RAM standard Version 2.0, 2.1 and 2.2 discs can be used in this unit.
ꢀ You cannot use the cartridge-type DVD-RAM disc in this unit.
DVD+RW (Digital Video Disc + ReWritable)
ꢀ These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again
on the same Disc.
ꢀ Playable on DVD+RW compatible players (automatically finalization)
ꢀ The edited contents are playable on DVD+RW compatible players only after finalization
ꢀ Recordings can be edited the title/chapter
DVD+R (Digital Video Disc + Recordable)
ꢀ These Discs can be recorded only once. After you finalize a DVD+R, you cannot record on it or edit
it any more.
ꢀ Playable on DVD+R compatible players (after finalization)
ꢀ Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine,
added chapter mark, etc.)
ꢀ Limited title/chapter editing features.
DVD+R DL (Digital Video Disc + Recordable; Double Layer)
ꢀ These Discs can be recorded only once. After you finalize a DVD+R DL, you cannot record on it or
edit it any more.
ꢀ Storage space is nearly doubled with double layer DVD+R media, allowing consumers to record up
to 8.5GB of video on a single DVD+R disc.
ꢀ Playable on DVD+R DL compatible players (after finalization)
ꢀ Any edited contents are not be compatible on DVD+R DL compatible players. (Hide, chapter
combine, added chapter mark, etc.)
ꢀ Limited title/chapter editing features.
Recommended recordable DVD discs
DVD-R
Mitsubishi (8x, 16x)
That’s (8x, 16x)
Verbatim (8x)
DVD+R
Mitsubishi (8x, 16x)
Ricoh (8x, 16x)
Verbatim (8x)
DVD-RW
Mitsubishi (4x)
Verbatim (4x)
JVC (4x)
Victor (4x)
Maxell (4x)
DVD+RW
Mitsubishi (4x) Mitsubishi (2.4x, 8x)
SONY (4x)
Imation (4x)
Maxell (4x)
Ricoh (4x)
DVD+R(DL)
DVD-RAM
Fujifilm (2x)
Mitsubishi (3x)
Maxell (5x)
Maxell (2.4x)
-
-
-
-
-
-
-
-
-
Note: If a DVD-RW/DVD+RW discs is recorded using a personal computer or other DVD recorder, you cannot
format the disc using this recorder. So if you want to use the disc on this recorder, you must format the disc
using the original recorder.
6
Playable Discs
DVD (8 cm / 12 cm disc)
Discs such as movies that can be purchased or rented
Audio CD (8 cm / 12 cm disc)
Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased
Video CD (VCD) (8 cm / 12 cm disc)
VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format
CD-R/CD-RW (8 cm / 12 cm disc)
CD-R/CD-RW discs that contain audio titles, DivX, MP3, WMA, or JPEG files.
Notes:
ꢀ
Depending on the conditions of the recording equipment or the CD-R/RW (or DVD R/RW) disc itself, some
CD-R/RW (or DVD R/RW) discs cannot be played on the unit.
ꢀ
ꢀ
ꢀ
Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.
Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD R/RW) may
not be playable.
ꢀ
ꢀ
DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder
may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder’s lens.
If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases
in which it may not play because of the settings of the application software used to create the disc. (Check
with the software publisher for more detailed information.)
ꢀ
ꢀ
This recorder requires discs and recordings to meet certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types
of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-
existing conditions (see above) to ensure compatible playback.
Customers should note that permission is required in order to download MP3 / WMA files and music from the
Internet. Our company has no right to grant such permission. Permission should always be sought from the
copyright owner.
Regional Code
This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as
the rear of the unit or “ALL”.
Notes on Regional Codes
ꢀ
Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must
match your unit’s regional code or the disc cannot play.
ꢀ
If you try to play a DVD with a different regional code from the unit, the message “Incorrect region code. Can’t
play back” appears on the TV screen.
7
Using Memory Card
Card useable on this unit
ꢀ Compact Flash Card (CF)
1. Insert a memory card.
2. Press HOME on the remote control.
3. Select [Music] or [Photo] option.
ꢀ Micro Drive (MD), ST1 MD
ꢀ Secure Digital Card (SD), Mini SD
ꢀ Multi Media Card (MMC), MMC Plus, RS MMC,
MMC Mobile
4. Select [MEMORY CARD] then press ENTER.
The Memory Card slot choice menu appears on
the TV screen.
ꢀ xD-Picture Card (xD)
ꢀ Memory Stick (MS), MS Duo, MS Pro, MS Pro Duo
ꢀ Compatible with: FAT 12, FAT 16, or FAT 32
ꢀ Only use the memory cards recommended above.
Regarding Write Protect
For cards that have a write protect switch, if the switch
is on it will not be possible to write, erase or format
the card.
5. Use b / B to select the desired Memory Card slot
then press ENTER.
The menu appears on the TV screen.
Details for the options are on page 17.
Inserting/Removing the Memory Card
Slot 2
Slot 1
Insert SD, Mini SD,
MMC, MMC Plus,
RS MMC, MMC Mobile,
xD, MS, MS Duo,
MS-Pro, or MS Pro Duo
card
Insert CF, MD, or
ST1 MD
Inserting the card
Insert straight-in until it fits into place.
Removing the card
Slot 1: Withdraw the card carefully.
Slot 2: Press on the center of the card then withdraw
the card carefully.
Notes:
ꢀ Keep the memory card out of reach of children. If
swallowed, seek medical advice immediately.
ꢀ A memory card may not be used for this recorder
ꢀ Do not extract the memory card while operating
(play, copy, etc.).
8
Front Panel
a
b
c
d e f g h
i
jk
l
m
n
o
p
a POWER button
j PIP: Selects PIP function on or off.
Switches the recorder ON or OFF.
k Remote Sensor
b Disc Tray
Point the recorder remote control here.
Insert a disc here.
l MEMORY CARD Slot 1
c Display window
Insert a memory card (CF/MD/ST1 MD).
Shows the current status of the recorder.
m MEMORY CARD Slot 2
TV: Indicates when the recorder is in TV tuner
mode.
Insert a memory card (SD/Mini SD/MMC/
MMC Plus/RS MMC/MMC Mobile/xD/MS/
MS Duo/MS-Pro/MS Pro Duo ).
REC: The recorder is recording.
: Indicates when the recorder is in timer
recording or a timer recording is programmed.
n DV IN
Connect the DV output of a digital camcorder.
: Shows the current status of the recorder
(clock, channel number, etc).
o AV IN 2 (S-VIDEO IN)
Connect the S-Video output of an external source
d OPEN/CLOSE (Z)
(TV/ Monitor, VCR, Camcorder, etc.).
Opens or closes the disc tray.
p AV IN 2 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
e RESOLUTION
Sets the output resolution for HDMI and
COMPONENT/ PROGRESSIVE SCAN VIDEO
OUT jacks.
- HDMI: 1080i, 720p, 480p, 480i
- COMPONENT: 480p, 480i
f N / X (PLAY / PAUSE)
Starts playback.
Pause playback or recording temporarily,
press again to exit pause mode.
g x (STOP)
Stops playback or recording.
h z (REC)
Starts recording. Press repeatedly to set the
recording time.
i CH (V/v)
Scans up or down through memorized channels.
9
INPUT: Changes the input to use
for recording (Tuner, AV1-2, or DV
IN).
SUBTITLE ( ): Selects a subtitle
language.
ZOOM: Enlarges DVD video
Remote Control
0-9 numerical buttons: Selects
image.
numbered options in a menu.
CHP. ADD: Inserts a chapter
I.SKIP (INSTANT SKIP): Skips 30
marker when playing/recording.
seconds forward during playback.
ꢀ ꢀ ꢀ ꢀ ꢀ d ꢀ ꢀ ꢀ ꢀ ꢀ
TV Control Buttons: See page
48.
REC (z): Starts recording.
REC MODE: Selects the recording
mode.
a
ꢀ ꢀ ꢀ ꢀ ꢀ b ꢀ ꢀ ꢀ ꢀ ꢀ
SCAN (m / M): Search
backward or forward.
TITLE: Displays the disc’s Title
menu, if available.
SKIP (. / >): Go to next or
previous chapter or track.
THUMBNAIL: Selects a thumbnail
picture.
PAUSE/STEP (X) : Pause
playback or recording temporarily.
PLAY MODE: Selects a play
mode.
MARKER: Marks any point during
playback.
SEARCH: Displays Marker Search
menu.
CLEAR: Removes a mark on the
Marker Search menu.
b
c
PLAY (N): Starts playback.
STOP (x): Stops playback or
recording.
ꢀ ꢀ ꢀ ꢀ ꢀ c ꢀ ꢀ ꢀ ꢀ ꢀ
HOME: Accesses or removes the
HOME menu.
TIMESHIFT: To play the title being
recorded and also currently being
recorded appears as PIP.
MENU/LIST: Accesses menu on a
DVD disc. Switches between Title
List-Original and Title List-Playlist
menu.
PIP: Selects PIP function on or off.
d
b / B / v / V (left/right/up/down):
Selects an option in the menu.
RESOLUTION: Sets the output
resolution for HDMI.
ENTER (
)
Acknowledges menu selection.
button(s) is not used.
CH (+/-): Scans up or down
through memorized channels.
DISPLAY: Accesses On-Screen
Display.
ꢀ ꢀ ꢀ ꢀ ꢀ a ꢀ ꢀ ꢀ ꢀ ꢀ
POWER: Switches the recorder
ON or OFF.
RETURN (O)
Removes the menu.
AUDIO ( ): Selects an audio
language or audio channel.
OPEN/CLOSE (Z): Opens and
closes the disc tray.
TV/DVD: To view channels
selected by the recorder tuner or
by the TV tuner.
Remote Control Battery Installation
Remote Control Operation
Remove the battery cover on the
rear of the Remote Control, and
insert two R03 (size AAA)
Point the Remote Control at the remote sensor and
press the buttons.
Caution
batteries with
correctly.
and
matched
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
10
Hookup and Settings
Rear Panel
a
b
c d
e
f
g
h
i
j
k
a ANT. IN
h AC Power Cord
Connect the antenna to this terminal.
Plug into the power source.
b HDMI Connector (Type A)
i RF. OUT
HDMI output providing a high quality interface for
Connect to a TV with RF coaxial inputs.
digital audio and video.
j S-VIDEO OUT
Connect to a S-Video Input on TV.
c VIDEO / AUDIO OUT (Left/Right)
Connect to a TV with video/audio inputs.
k COMPONENT VIDEO OUT/PROGRESSIVE
SCAN (Y Pb Pr)
d AV IN 1 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
Connect to a TV with Y Pb Pr inputs.
e COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
f OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
g Cooling fan
11
Connecting an Antenna
or Cable TV
a
Antenna
Antenna
Cable TV
Wall Jack
a
:
Antenna
Flat Wire
(300 ohm)
Disconnect the antenna from the rear of the TV and
identify the antenna cable. If it is a round 75 ohm
coaxial cable connect it directly to the jack marked
ANT. IN on your Recorder. If your antenna cable is flat
connect it to a 300-ohm to 75-ohm antenna
adaptor (not supplied) and slip the adaptor over the
ANT. IN jack. Don’t attempt to screw it into to the
Recorder.
300/75 ohm
Adapter
(Not supplied)
OR
OR
b
Cable TV:
If your cable connection has no converter or
descrambler, unscrew the cable from your TV and
attach it to the ANT. IN jack on the Recorder.
Rear of the recorder
If a converter is required connect a coaxial cable from
the wall jack to the IN connector on the converter, and
a coaxial cable from the OUT connector on the
converter to the ANT. IN on your Recorder. This cable
hookup permits both TV and Recorder operation.
b
Cable TV
Wall Jack
Back Panel of
Typical Cable Box
To view or record a CATV channel
1. Tune the TV to the Recorder output channel (CH 3
or 4).
2. Set the Recorder channel selector to the cable
output channel. (Example: CH3)
3. Select a channel using the cable converter.
Notes:
•
With this connection, you cannot record one channel
while viewing another.
•
If you are using a cable box to tune channels, it is not
necessary to do Auto Channel Set.
12
If your television is a high-definition or “digital ready”
television, you may take advantage of the recorder’s
progressive scan output for higher video
Connections to Your TV
ꢀ
Make one of the following connections, depending
on the capabilities of your existing equipment.
resolution. If your TV does not accept the
Progressive Scan format, the picture will appear
scrambled if you try Progressive Scan on the recorder.
Tips
ꢀ
Set the resolution to 480p using RESOLUTION
button for progressive signal.
ꢀ
Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the recorder. Use only one of the
connections described below.
Note:
Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack) or S-VIDEO
connection.
ꢀ
Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
make the best connections.
Caution
Caution
If the resolution is set to 720p or 1080i, the VIDEO
OUT, S-VIDEO OUT and COMPONENT VIDEO OUT
connections are not available.
– Make sure the recorder is connected directly to the
TV. Tune the TV to the correct video input channel.
– Do not connect the recorder’s AUDIO OUT jack to
the phono in jack (record deck) of your audio
system.
– Do not connect your recorder via your VCR. The
DVD image could be distorted by the copy
protection system.
Rear of TV
ANTENNA
INPUT
S-VIDEO
INPUT
VIDEO
INPUT
AUDIO INPUT
COMPONENT VIDEO INPUT
Pr
R
Y
Pb
L
RF coaxial connection
Connect the RF OUT jack on the Recorder to the
antenna in jack on the TV using the supplied 75-ohm
Coaxial Cable (R).
R
S
How to set the Recorder’s RF output channel
C
V
A
1. When the Recorder is turned off, press and hold
CH (V/v) on the front panel for more than five
seconds. [ch03] or [ch04] appears in the display
window.
2. Press CH (V/v) to change the RF output channel
(ch03 or ch04).
3. Tune the TV to this channel.
Video connection
Connect the VIDEO OUT jack on the recorder to the
video in jack on the TV using the video cable (V).
Rear of the recorder
Audio (Left/Right) Connection
Connect the left and right AUDIO OUT jacks of the
recorder to the audio left and right IN jacks on the TV
using the audio cables (A). Do not connect the
recorder’s AUDIO OUT jack to the phono in jack
(record deck) of your audio system.
S-Video connection
Connect the S-VIDEO OUT jack on the recorder to the
S-Video in jack on the TV using the S-Video cable (S).
Component Video connection
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the recorder to the corresponding
input jacks on the TV using an Y Pb Pr cable (C).
13
HDMI compatible TV
HDMI connection
HDMI
If you have a HDMI TV or monitor, you can connect it
to this recorder using a HDMI cable.
1. Connect the HDMI jack on the recorder to the
HDMI jack on a HDMI compatible TV or monitor
(H).
H
2. Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
Notes:
ꢀ If your TV is NOT capable of handling 96 kHz
sampling frequency, set the [Sampling Freq.] option
to [48 kHz] on the setup menu (See page 20).
When this choice is made, this unit will
automatically convert any 96 kHz signals to 48 kHz
so your system can decode them.
Rear of the recorder
About HDMI
ꢀ If your TV is not equipped with Dolby Digital and
MPEG decoder, set the [Dolby Digital] and [MPEG]
options to [PCM] on the setup menu (See page 20).
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for
use with DVD Players, Set-Top Boxes, and other AV
devices.
HDMI was developed to provide the technologies of
HDCP (High Definition Contents Protection). HDCP is
used to protect digital content transmitted and
received.
ꢀ If your TV is not equipped with DTS decoder, set
the [DTS] options to [OFF] on the setup menu (See
page 20). To enjoy DTS multi channel surround, you
must connect this recorder to a DTS compatible
receiver via one of this recorder’s digital audio
outputs.
HDMI has the capability to support standard, enhanced,
or high-definition video plus standard to multi-channel
surround-sound audio, HDMI features include
uncompressed digital video, a bandwidth of up to 5
gigabytes per second, one connector (instead of several
cables and connectors), and communication between the
AV source and AV devices such as DTVs.
ꢀ The arrow on the cable connector body should face
up for correct alignment with the connector on the
recorder.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
(Type A)
ꢀ If there is noise or lines on the screen, please check
the HDMI cable.
Additional Information for HDMI
ꢀ When you connect a HDMI or DVI compatible
device make sure of the followings:
- Try switching off the HDMI/DVI device and this
recorder. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then switch
on this recorder.
Tip :
When you use HDMI connection, you can change the
resolution (480i, 480p, 720p, or 1080i) for the HDMI
output using RESOLUTION button.
Caution
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720(1440)x480i, 720x480p, 1280x720p, or
1920x1080i video input.
Changing the resolution when the recorder is
connected with HDMI connector may result in
malfunctions. To solve the problem, turn off the
recorder and then turn it on again.
ꢀ Not all HDCP-compatible DVI devices will work with
this recorder.
- The picture will not be displayed properly with
non-HDCP device.
14
Connecting to an Amplifier
Rear of the recorder
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and Right AUDIO OUT jacks on the
recorder to the audio left and right in jacks on your
amplifier, receiver, or stereo system, using the audio
cables (A).
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2, or DTS)
A
X
O
1. Connect one of the recorder’s DIGITAL AUDIO
OUT jacks (OPTICAL O or COAXIAL X) to the
corresponding in jack on your amplifier. Use an
optional digital (optical O or coaxial X) audio cable.
L
R
COAXIAL
DIGITAL INPUT
OPTICAL
2. You will need to activate the recorder’s digital
output. (See “Audio Settings” on page 20.)
AUDIO INPUT
DIGITAL INPUT
Amplifier (Receiver)
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your recorder (MPEG 2,
Dolby Digital and DTS). Check the receiver manual
and the logos on the front of the receiver.
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and the double-
D symbol are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Caution:
Due to the DTS Licensing agreement, the digital
output will be in DTS digital out when DTS audio
stream is selected.
Notes:
–
If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
– Six Channel Digital Surround Sound via digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
– To see the audio format of the current DVD in the
on-screen display, press AUDIO.
– This recorder does not perform internal (2 channel)
decoding of a DTS sound track. To enjoy DTS
multi channel surround, you must connect this
recorder to a DTS compatible receiver via one of
this recorder’s digital audio outputs.
15
Connecting a Digital Camcorder
Accessory Audio/Video (A/V)
Connections
Using the front panel DV IN jack, it is possible to
connect a DV digital camcorder and digitally transfer
DV tapes to DVD.
Connecting to the AV IN 1 or AV IN 2
Jacks
Use a DV cable (not supplied) to connect the DV
in/out jack of your DV camcorder to the front panel DV
IN jack of this recorder.
Connect the input jacks (AV1, AV2) on the recorder to
the audio/video out jacks on your accessory
component, using audio/video cables.
Note:
Note:
This jack is for connection to DV digital camcorder
only. It is not compatible with digital satellite tuners or
D-VHS video decks.
If you use the S-VIDEO IN jack on the front panel, the
VIDEO IN jack on the front panel is not available.
Jack panel of Accessory Component
(VCR, Camcorder, etc.)
DV Digital Camcorder
AUDIO
OUTPUT
DV
IN/OUT
R
L
VIDEO
OUTPUT
S-VIDEO
OUTPUT
OR
Front of the recorder
Rear of
Front of
the recorder
the recorder
16
Auto Set Up
Using the Home Menu
After the POWER is pressed for the first time to turn
on the unit or resetting the unit, the Initial Setup
Wizard function sets the language, clock and tuner
channels automatically.
From the Home Menu screen you can access all the
Media for playback and recording of the recorder.
1. Press HOME to display the Home Menu screen.
The unit will be in TV viewing mode always when
the Home menu appears.
1. Select a language for the Setup menu and on-
screen display. Use v / V to select a language
then press ENTER.
2. Use b / B buttons to select a main option you
want. Sub options appears.
3. Use v / V and ENTER buttons to select the sub
option you want.
2. Prese check your antenna connections.
Press B to move next step.
4. To exit the HOME menu, press HOME.
Setup
ꢀ Start: Displays Setup menu.
3. Please ENTER while [Start] option is selected.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner’s memory.
TV
ꢀ Auto Ch. Scan: Displays [Auto Channel Set] menu.
(See page 18)
ꢀ Ch. Edit: Displays [CH. Add/Del] menu.
(See page 18)
ꢀ Timer Record: Displays [Timer Record List] menu.
(See page 36)
Movie
4. Use v / V to select the Clock Set option then
ꢀ DISC:
press ENTER.
- Displays Title List menu for recordable disc (page
39)
- Displays Movie List menu for DivX disc. (page 29)
- Plays back Video CD or DVD-Video disc (page
25-28).
Photo (See page 31-32)
ꢀ [Auto]
ꢀ DISC: Displays Photo List menu for disc.
1) Use v / V / b / B to choose Band, PBS
channel, Time Zone, Daylight Savings
options. (Details are on page 19)
2) Press ENTER to confirm your setting.
ꢀ MEMORY CARD: Displays memory card choice
menu. (See page 8)
Music (See page 30)
ꢀ [Manual]:
ꢀ DISC: Displays Music List menu for disc.
1) Enter the necessary information for date and
time.
ꢀ MEMORY CARD: Displays memory card choice
menu. (See page 8)
b / B (left/right): Moves the cursor to the
previous or next column.
Easy Menu
ꢀ Disc Manager: Displays the Disc Settings menu.
(See page 22-23)
v / V (up/down): Changes the setting at the
current cursor position.
2) Press ENTER to confirm your setting.
5. Press ENTER while [Close] is highlighted to finish
setup.
ꢀ Rec. Mode: Displays the menu to select the record
mode. (See page 22)
ꢀ DV Input: Set the recorder to the DV input mode.
17
Auto Channel Set
Connect the Recorder to the desired type of antenna
or cable TV system as shown on page 12.
This Recorder is equipped with a frequency
synthesized tuner capable of receiving up to 181
channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
Initial Settings
In this menu system, there are several ways to
customize the settings provided. Most menus consist
of three levels to set up the options, but some require
greater depth for the variety of settings.
General Operation
1. Select the [Auto Channel Set] option.
1. Press HOME and select [Setup] option.
2. Press B to move to the third level.
2. Select [Start] option then press ENTER.
The Setup menu appears.
[Start] icon is highlighted.
3. Press ENTER to begin the channel search.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner’s memory.
Note:
After the Auto Channel Set proceeding is complete,
make sure the Tuning Band is set appropriately (TV or
CATV) on tuning band, follow steps 1~2 as shown
previous (Tuning Band Select) to choose the correct
Tuning Band (TV or CATV).
3. Use v / V to select the desired option.
4. While the desired item is selected, press B to
To Add or Erase Channels
This feature allows you to add to or erase channels
from memory manually.
move to the second level.
5. Use v / V to select the second desired option.
1. Select the [CH. Add/Del] option.
6. Press B to move to the third level.
2. Press B to move to the third level.
7. Use v / V to select the desired setting then press
ENTER to confirm your selection.
[Edit] icon is highlighted.
3. Press ENTER and the Channel Edit menu
appears.
Some items require additional steps.
8. Press RETURN (O) repeatedly to exit the Setup
menu.
Note:
Press b to go back to the previous level.
4. Use v / V or number buttons to select a channel
General Settings
then press B.
5. If you want to obtain a clearer picture, tune the
[MFT] option using v / V then press B.
[Add] or [Delete] icon is highlighted.
Tuning Band Select
1. Select the [Tuning Band] option then press B .
6. Press ENTER to confirm your setting.
2. Use v / V to select the tuning band (TV or CATV)
option then press ENTER.
7. Repeat steps 4-6 to add or erase additional
channels.
TV: If you are using a standard antenna to receive
channels.
CATV: If you are using basic cable to receive
channels.
8. Press HOME or RETURN (O) to exit the menu.
18
TV Aspect
Auto Clock Set
In the Auto option, the Recorder looks for a channel
carrying XDS (Extended Data Services) information.
XDS updates the clock using the Coordinated
Universal Time.
Selects the aspect ratio of the connected TV (4:3
standard or wide).
ꢀ [4:3 Letter Box] Select this when connecting to a 4:3
screen TV. Displays a wide picture with bands on
the upper and lower portions of the screen.
1. Select [Clock set] option then press B.
2. Use v / V to select [Auto] option then press
ꢀ [4:3 Pan Scan] Select this when connecting to a 4:3
screen TV. Automatically displays a wide picture on
the entire screen and cuts off the portions that do
not fit.
ENTER.
3. Use v / V / b / B to choose the [Band],
[PBS Ch.], [Time Zone], and [Daylight Savings]
options.
ꢀ [16:9] Select this when connecting to a wide-screen
[Band] Choose your TV BAND (TV or CATV).
[PBS Ch.] Choose your local PBS channel.
TV or TV with a wide mode function.
[Time Zone] Choose your Time Zone manually.
When Timezone is set to Auto, the Recorder will
use XDS information to determine the proper
setting.
Power Save Mode
You can set up the unit into an economic power save
mode. Nothing is displayed in the display window
when the unit is turned off.
[Daylight Savings] Choose Auto, ON, or OFF.
When it is set to Auto, the Recorder will use XDS
information to determine the proper setting.
ꢀ [OFF] Power Save Mode is not active.
ꢀ [ON] Power Save Mode is active.
4. Press ENTER to confirm your setting.
Note:
Note :
The Power Save Mode is not available in the standby
mode for the timer recording.
The Auto Clock Feature enables the Recorder to set
up the clock when the Recorder is turned off.
Factory Set
Manual Clock Set
If your local TV station does not send date and time
information, or sends incorrect information, you can
set the clock manually.
If you need to, you can reset the Recorder to all its
factory settings. Select ‘‘Set’’ icon then press ENTER
and auto setup menu will appear, see page 17.
Note:
1. Select [Clock set] option then press B.
Some options can not be reset. (Rating, Password,
and Area Code)
2. Use v / V to select [Manual] option then press
ENTER.
3. Enter the necessary information for year, date and
time.
b / B (left/right): Moves the cursor to the previous
or next column.
v / V (up/down): Changes the setting at the
current cursor position.
4. Press ENTER to confirm your setting.
19
Dolby Digital / DTS / MPEG
Language Settings
ꢀ [Bitstream]: Select “Bitstream” if you connect the
recorder’s DIGITAL AUDIO OUT jack to an amplifier
or other equipment with a Dolby Digital, DTS or
MPEG decoder.
ꢀ [PCM] (for Dolby Digital / MPEG): Select when
connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM
audio.
ꢀ [Off] (for DTS): If you select “Off”, the DTS signal is
Display Menu
not output through the DIGITAL AUDIO OUT jack.
Select a language for the Setup menu and on-screen
display.
Sampling Frequency
If your receiver or amplifier is NOT capable of
handling 96 kHz signals, select [48 kHz]. When this
choice is made, this unit will automatically convert any
96 kHz signals to 48 kHz so your system can decode
them.
Disc Menu/Audio/Subtitle
ꢀ [Original]Refers to the original language in which
the disc was recorded.
If your receiver or amplifier is capable of handling
96 kHz signals, select [96 kHz]. When this choice is
made, this unit will pass each type of signal through
without any further processing.
ꢀ [Others] To select another language, press number
buttons then ENTER to enter the corresponding
4-digit number according to the language code list
in the reference chapter (see page 47). If you make
a mistake while entering number, press CLEAR
repeatedly to delete numbers one by one then
correct it.
DRC (Dynamic Range Control)
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen to a movie at a lower volume
without losing clarity of sound. Set DRC to [ON] for
this effect.
ꢀ [Off](for Disc Subtitle) : Turn off Subtitle.
Audio Settings
Each DVD disc has a variety of audio output options.
Set the recorder’s Audio Output according to the type
of audio system you use.
Vocal
Set Vocal to [ON] only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
20
Set Password
Lock (Parental Control) Settings
1. Select [Set Password] option then press B.
2. Follow step 2 as shown “Rating” on left.
To change the password, select the [Change],
press ENTER and input the new 4-digit code.
Input it again to verify.
To delete the password, select [Delete] then press
ENTER.
If you forget your 4-digit code
If you forget your password, to clear the current
password, follow the procedure below.
1. Display Setup menu then select an 1 level icon.
2. Use the Number buttons to enter the 6-digit
number “210499”.
3. Select [Yes] then press ENTER. The 4-digit
password is cleared. Enter a new code.
Rating
Blocks playback of rated DVDs based on their
content. Not all discs are rated.
1. Select [Rating] option then press B.
2. To access the Rating, Password and Area Code
features, you must input the 4-digit security code
you created.
Area Code
Enter the code of an area whose standards were used
to rate the DVD video disc, referring to the list (See
“Area Codes”, page 47.).
If you have not yet entered a security code you
are prompted to do so. Input a 4-digit code. Enter
it again to verify. If you make a mistake while
entering number, press CLEAR repeatedly to
delete numbers one by one then correct it.
1. Select [Area Code] option then press B.
2. Follow step 2 as shown “Rating” on left.
3. Select the first character using the v / V
3. Select a rating using the v / V buttons.
buttons.
[1] - [8]: Rating one (1) has the most restrictions
and rating eight (8) is the least restrictive.
4. Shift the cursor using B buttons and select the
second character using v / V buttons.
[No Limit]: If you select [No Limit], parental control
is not active and the disc plays in full.
5. Press ENTER to confirm your area code selection.
4. Press ENTER to confirm your rating selection.
Note:
If you set a rating for the recorder, all disc scenes with
the same rating or lower are played. Higher rated
scenes are not played unless an alternate scene is
available on the disc. The alternative must have the
same rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
the disc.
21
Recording Settings
Disc Settings
Initialize
If you load a completely blank disc, the recorder will
initialize the disc.
DVD-R: The recorder initialize the disc to Video mode.
The recording mode will always be Video mode.
DVD-RW/DVD+RW/DVD+R (DL)/DVD-RAM: The
Initialize menu will appears. Select [OK] then press
ENTER. DVD-RW disc is initialized to Video mode.
Also, you can reformat the DVD-RW/DVD+RW/
DVD-RAM from the Setup menu as below.
Disc Record Mode
You can set the picture quality for recording;
XP (High Quality), SP (Standard Quality),
LP (Low Quality), EP (Extend Quality).
DV Recording Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV
IN jack.
Some digital camcorders have two stereo tracks for
audio. One is recorded at the time of shooting; the
other is for overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
1. Select [Initialize] option then press B.
2. Press ENTER while [Start] is selected.
Initialize menu appears.
3. Use b / B to select a desired mode (VR Mode or
Video Mode) then press ENTER.
Confirm message will appear.
On the Audio 2 setting, the overdubbed sound is
used.
For DVD+RWs, go to step 4.
4. Use b / B to select [OK] then press ENTER.
Auto Chapter
It takes a few moments to initialize the disc.
When recording in Video mode, chapter markers are
put in specified setting. You can change this interval to
5 minutes or 10 minutes. If you select [None], switch
off automatic chapter marking altogether with the
[None] setting.
Caution
If you want to change the disc format, everything
recorded on the disc will be erased.
22
Disc Label
Disc Settings (Continued)
Use this to enter a name for the disc. This name
appears when you load the disc and when you display
disc information on-screen.
ꢀ The disc name can be up to 32 characters long.
ꢀ For discs formatted on a different recorder, you will
see only a limited character set.
Finalize
Finalizing ‘fixes’ the recordings in place so that the
disc can be played on a regular DVD player or
computer equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen
for navigating the disc. This is accessed by pressing
MENU/LIST or TITLE.
1. Select [Disc Label] option then press B.
2. Press ENTER while [Edit] is selected.
Keyboard menu appears.
Caution
To enter characters, see page 43.
Once you have finalized a DVD-R and DVD+R disc,
you cannot edit or record anything else on that disc
except DVD+RW. However, you can record and edit a
DVD-RW disc by choosing [Unfinalize] option.
Disc Protect
When recording in DVD-RAM / DVD+RW / +R disc or
VR mode formatted DVD-RW disc, set to [ON] to
prevent accidental recording, editing or deleting of the
disc loaded. If you need to unlock the disc to make
edits, select [OFF].
PBC
PBC stands for Playback Control and refers to special
menus and navigation features that are available on
some Video CDs.
ꢀ [ON] Video CDs are played according to the PBC, if
available.
ꢀ [OFF] Video CDs are played the same way as Audio
CDs.
1. Select [Finalize] option then press B.
2. Press ENTER while [Finalize] is selected.
Finalize menu appears.
3. Select [OK] then press ENTER.
The recorder starts finalizing the disc.
Auto Play
You can set up the unit so a DVD disc automatically
starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this unit will search for
title that has the longest playback time and then play
back the title automatically.
Note:
ꢀ How long finalization takes depends on the type of
disc, how much is recorded on the disc, and the
number of titles on the disc.
ꢀ DVD+R DL disc can take up to 30 minutes to
finalize.
Note:
The Auto Play function may not work for some DVDs.
Tips
ꢀ If you load a DVD-RW that has already been
finalized, you can ‘Unfinalize’ it by choosing
Unfinalize from the Finalize menu. After doing this,
you can edit and re-record onto the disc.
DivX
DivX Registration Code
We provide you the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX® VOD service. For more
ꢀ You cannot unfinalize a DVD-R and DVD+R (DL)
disc.
1. Select [About DivX(R)] option then press B.
ꢀ If [Disc Protect] option is set to [ON], the finalize is
not available. To finalize, set [Disc Protect] option to
[OFF].
2. Press ENTER while [View] is selected and the
registration code will appear.
3. Use the registration code to purchase or rent the
videos from DivX® VOD service at
download the video onto a disc for playback on
this unit.
Note:
All the downloaded videos from DivX® VOD can only
be played back on this unit.
23
Displaying Disc Information on-screen
You can display various information about the disc
loaded on-screen.
General Explanation of
On-Screen Display
This manual gives basic instructions for operating the
recorder. Some DVDs require specific operation or
allow only limited operation during playback. When
1. Press DISPLAY once to show current status.
this occurs, the symbol
appears on the TV screen,
indicating that the operation is not permitted by the
recorder or is not available on the disc.
2. Press DISPLAY once again to show various
playback information.
Displaying Information While Watching TV
The items displayed differ depending on the disc
type or playing status.
During viewing the TV, press DISPLAY to
display/remove the information displayed
on-screen.
Indicates channel number, station name, and
audio signal (STEREO, MONO) received by
the tuner.
Indicates the record mode,
free space, and elapsed
time progress bar.
Indicates disc name
and format.
3. You can select an item by pressing v / V and
change or select the setting by pressing b / B.
For details about each item, see the pages in
parentheses.
ꢀ [Title]: Current title (or track) number/total
number of titles (or tracks) (page 27)
ꢀ [Chapter]: Current chapter number/total number
of chapters (page 25)
ꢀ [Time]: Elapsed playing time (page 27)
ꢀ [Audio]: Selected audio language (DVD VIDEO
only) or audio channel (page 26)
ꢀ [Subtitle]: Selected subtitle (page 26)
ꢀ [Angle]: Selected angle/total number of angles
(page 27)
ꢀ [Sound]: Selected sound mode (page 28)
Indicates current audio
channel.
Note:
If no button is pressed for 10 seconds, the on-screen
display disappears.
Indicates current date and time.
24
Playback
General Playback Features
1. Load your chosen disc in the tray, with the playback side down.
2. Starts playback using HOME menu (see page 17).
3. To stop the playback, press STOP (x).
The unit records the stopped point, depending on the disc. “Xx” appears on the screen briefly.
Press PLAY (N) to resume playback (from the scene point). If you press STOP (x) again or unload the disc
(“x” appears on the screen.), the unit will clear the stopped point.
4. Press OPEN/CLOSE (Z) to remove the disc.
Press OPEN/CLOSE (Z) to close disc tray or press POWER (1), the disc tray closes automatically and unit
turns off.
Note:
If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be
entered and/or the disc must be authorized (see “Rating”, on page 21).
Buttons
Operations
Discs
All Discs
OPEN / CLOSE (Z) Opens or closes the disc tray.
All Discs
PAUSE/STEP (X)
During playback, press PAUSE/STEP (X) to pause
playback.
Press PAUSE/STEP (X) repeatedly to play
Frame-by-Frame.
DVD ALL VCD
Tip:
You can advance or back up the picture frame-by-frame by
pressing b / B repeatedly during PAUSE mode.
The picture frame-by-frame in reverse is not available for
Video CD.
SKIP (. / >)
During playback, press SKIP (. or >) to go to the next
chapter/track or to return to the beginning of the current
chapter/track.
DVD ALL VCD DivX
ACD MP3 WMA
Press SKIP . twice briefly to step back to the previous
chapter/track.
Tips:
ꢀ
To go directly to any chapter during DVD playback, press
DISPLAY twice and press v / V to select the chapter
icon. Then, input the chapter number or use b / B.
On an Audio CD, to go directly to any track, enter the
track number using the numbered buttons (0-9) during
playback.
ꢀ
SCAN (m / M)
During playback, press SCAN (m or M) repeatedly to
select the required scan speed.
DVD; 5 steps
DVD ALL VCD DivX
ACD
Video CD, DivX, Audio CD; 3 steps
While the playback is paused, press SCAN (m or M)
repeatedly to play in slow motion
DVD; 4 steps
DVD ALL VCD
DVD ALL
Video CD; 3 steps (Forward only)
ZOOM
During playback or pause mode, press ZOOM to enlarge
the video image.
(x1 size → x2 size → x4 size → x1 size (normal size)
You can move through the zoomed picture using b B v V
buttons.
25
General Playback Features (Continued)
Buttons
Operations
Discs
PLAY MODE
For repeat playback
During playback, press PLAY MODE repeatedly to select a
desired repeat mode.
DVD ALL VCD ACD
MP3 WMA
DVD (Chapter/Title/Off)
VR mode DVD-RW (Chapter/Title/All/Off)
Video CD, Audio CD (Track/All/Off)
MP3/WMA (Track/Folder/Off)
Notes:
ꢀ
On a Video CD with PBC, you must set PBC to [OFF] in the
Setup menu to use the Repeat function. See page 23.
If you press SKIP (>) once during Repeat Chapter
(Track) playback, the repeat playback cancels.
ꢀ
For repeat A-B
DVD ALL VCD
Karaoke DVD
ACD
During playback, press PLAY MODE repeatedly to select
point A then press ENTER to select point B
Repeats a sequence from point A (Starting point) to point B
(End point).
For random playback
During playback, press PLAY MODE repeatedly to display
“RANDOM”. The unit automatically begins Random
Playback.To return to normal playback, press PLAY MODE
repeatedly until “NORMAL” appears on the TV screen.
Tip:
By pressing SKIP > during Random playback, the unit
selects another title (track) and resumes Random playback.
DVD
TITLE
If the current DVD title has a menu, the title menu appears
on the screen. Otherwise, the disc menu may appears.
DVD
DVD
MENU/LIST
SUBTITLE (
The disc menu appears on the screen.
)
During playback, press SUBTITLE then press b / B
repeatedly to select a desired subtitle language.
DVD
AUDIO (
)
Press AUDIO then press b / B repeatedly to hear a
different audio language or audio track.
Note:
Some discs feature both Dolby Digital and DTS
soundtracks. There is no analog audio output when DTS is
selected. To listen to the DTS soundtrack, connect this
recorder to a DTS decoder via one of the digital outputs.
See page 15 for connection details.
Press AUDIO then press b / B repeatedly during playback
to hear a different audio channel (STEREO, LEFT or
RIGHT).
VR
Video
-RW
-RW
RAM
+RW
-R
+R
VCD DivX
DVD ALL
With DVD-RW discs recorded in VR mode that have both a
main and a Bilingual audio channel, you can switch among
Main (L), Sub (R), or Main+sub (L+R).
I.SKIP
Press I.SKIP repeatedly during playback to skip forward
30 seconds.
26
If a menu screen is displayed DVD VCD
Marker Search
The menu screen may be displayed first after loading a
DVD or Video CD which contains a menu.
VR
Video
-RW
DVD VCD
To enter a Marker
-RW
RAM +RW
-R
+R
DVD
Use the b / B / v / V buttons to select the
title/chapter you want to view, then press ENTER to
start playback.
Press TITLE or MENU/LIST to return to the menu
screen.
You can start playback from up to six memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to six
markers.
VCD
ꢀ Use the number buttons to select the track you want
to view.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
Press RETURN (O) to return to the menu screen.
ꢀ Menu setting and the exact operating procedures
for using the menu may differ depending on the
disc. Follow the instructions on the each menu
screen. You may also set PBC to [OFF] under
Setup menu (see page 23).
2. Use b / B / v / V to select a marked scene that
you want to recall or clear.
3. Press ENTER and playback starts from the
marked scene. Or, press CLEAR and the marked
scene is erased from the marker search menu.
VR
Video
-RW
Moving to another TITLE -RW
RAM +RW
-R
+R
DVD DivX
When a disc has more than one title, you can move to
another title as follows:
ꢀ
Press DISPLAY twice during playback then use v /
V to select the title icon. Then, press the
appropriate numbered button (0-9) or b / B to
select a title number.
VR
Video
-RW
Time Search -RW
RAM +RW
-R
+R
DVD DivX
Camera Angle DVD
To start playing at any chosen time on the disc:
If the disc contains scenes recorded at different
camera angles, you can change to a different camera
angle during playback.
1. Press DISPLAY twice during playback. The time
search box shows the elapsed playing time.
2. Press v / V to select the time clock icon
1. Press DISPLAY during playback. The On-Screen
Display appears on the TV screen.
and “-:--:--” appears.
3. Input the required start time in hours, minutes, and
seconds from left to right.
2. Use v / V to select the Angle icon in the On-
Screen Display.
If you enter the wrong numbers, press b B to
/
3. Use b / B to select a desired angle.
The number of the current angle appears on the
TV screen.
move the under bar (_) to the wrong number. Then
enter the correct numbers.
4. Press ENTER to confirm. Playback starts from the
selected time.
Tip:
The ANGLE indicator will blink on the TV screen at
scenes recorded at different angles to indicate that
angle switching is possible.
27
VR
Video
-RW
VR
Video
-RW
3D Surround -RW
RAM +RW
PIP (Picture in Picture) -RW
-R
+R
DVD VCD DivX
RAM +RW
-R
+R
DVD VCD
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
This function enables you to view the stored stations
in sub picture during playback.
1. Press DISPLAY during playback. The On-Screen
Display appears on the TV screen.
2. Use v / V to select the Sound icon in the On-
Screen Display.
3. Use b / B to select “3D SUR”.
To turn off the 3D Surround effect, select
“NORMAL”.
Finding Locations on a Disc VCD
You can directly access any point on a video CD
using this function. Use this function only while a
video CD is playing. Playback jumps to the point
specified.
On and off
Press PIP to switch on the sub picture, press this
button again to switch it off.
Input mode selection for sub picture
Press AV/INPUT to select the input mode for the
sub picture. Each time this button is pressed, each
input mode for the sub picture is displayed as
shown below.
1. Press SEARCH during playback.
The progress bar appears on the TV screen.
2. Use b / B to find a start position for playback.
Tuner
→
AV1
→
AV2
3. Press ENTER to confirm the selected position.
Playback starts from the selected position.
Program selection for sub picture
Use PR/CH (+/-) to change the program when sub
picture’s input is set to tuner. The selected program
number is displayed on the TV screen. You can
view the selected program by pressing STOP (x).
Note:
This function works only when no marker is
memorized.
Sub picture position change
Last Condition Memory DVD
Press b / B repeatedly until desired position is
achieved. The sub picture moves clockwise or
counterclockwise.
This recorder memorizes the user settings for the last
disc that you have viewed. Settings remain in memory
even if you remove the disc from the recorder or
switch off the recorder. If you load a disc that had its
settings memorized, the latest stop position is
automatically recalled.
Notes:
– Settings are stored in memory for use any time.
– This recorder does not memorize settings of a disc
if you switch off the recorder before commencing to
play it.
28
Movie List menu options
Playing a DivX Movie File
1. Press v / V to select a folder/file on the [Movie
List] menu then press ENTER.
The recorder can play DivX files. Before playing DivX
files, read “DivX file requirement” on right.
[Movie List] menu options appear.
The menu options displayed differ depending on
the selected media.
Note:
This recorder cannot play back the DivX file(s) in the
Memory Card.
2. Press v / V / b / B to select an option, and press
ENTER.
1. Press HOME.
ꢀ [Play] Start playback the selected title.
ꢀ [Open] Opens the folder and a list of files in the
folder appears
2. Select [Movie] option.
3. Select a media that contains DivX file(s) then
press ENTER.
The [Movie List] menu appears on the TV screen.
DivX file requirement
Available resolution size: 720x576 (W x H) pixel
DivX file extensions: “.avi”, “.divx”
Playable DivX subtitle: “.smi”, “.srt”,
“.sub (Micro DVD format only)”,
“.txt (Micro DVD format only)”
Playable Codec format: “DIV3”, “MP43”, “DIVX”,
“XVID”, “DX50”
Playable Audio format: “AC3”, “PCM”, “MP2”,
“MP3”, “WMA”
ꢀ Sampling frequency:
within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)
ꢀ Bit rate:
within 8 - 320kbps (MP3), 32 - 192kbps (WMA)
4. Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons on the remote to highlight
and
press ENTER.
5. If you want to view a particular file, press v / V to
highlight a file and press PLAY (N).
You can use variable playback functions. Refer to
pages 25-28.
CD-R Format: ISO 9660 and JOLIET.
DVD R/RW Format: ISO 9660 (UDF Bridge format)
Maximum Files/Disc: Less than 1999 (total number
of files and folders)
6. Press STOP to stop the playback. The [Movie List]
menu appears.
Notes on DivX format
ꢀ If the number of the screen frame is over 29.97
frames per second, this unit may not operate
normally.
Notice for displaying the DivX subtitle
ꢀ If the video and audio structure of recorded file is
not interleaved, returns to the menu screen.
ꢀ If the file is recorded with GMC, the unit supports
only 1-point of the record level.
If the subtitle does not display properly, please follow
the steps below.
1. Press PAUSE/STEP when the subtitle appears.
2. Press and hold SUBTITLE about 3 seconds.
The language code will appear.
GMC?
*
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
MPEG4 standard. Some MPEG4 encoders, like
DivX or Xvid, have this option.
There are different levels of GMC encoding,
usually called 1-point, 2-point, or 3-point GMC.
3. Press b / B to select another language code until
the subtitle is displayed properly.
4. Press PLAY (N) to continue playback.
29
Audio CD and Music List menu options
Playing an Audio CD or MP3/WMA
file
1. Press v / V to select a folder/file on the [Music
List] menu then press ENTER.
The recorder can play audio CDs and MP3/WMA files.
Before playing MP3/WMA files, read “MP3/WMA audio
file requirement” on right.
The menu options appear.
The menu options displayed differ depending on
the selected media.
2. Press v / V / b / B to select an option, and press
1. Press HOME.
ENTER.
The HOME menu appears.
ꢀ [Play] Start playback the selected title.
2. Select [Music] option.
ꢀ [Random] Start or stop random playback.
3. Select a media that contains MP3/WMA or audio
title then press ENTER.
ꢀ [Open] Opens the folder and a list of files in the
folder appears
The [Music List] menu appears on the TV screen.
ꢀ [Delete] Deletes the selected file(s)/folder(s)
from the memory card. (page 32)
Random
1. Press v / V to select a file then press ENTER.
The menu options appear.
4. Use v/V to select a track then press PLAY (N).
Playback starts.
2. Press v / V to select [Random] option then press
ENTER.
You can use variable playback functions. Refer to
pages 25-28.
The unit automatically begins random playback
and “RANDOM” appears on the menu screen.
Tips:
3. To return to normal playback, select [Random]
option again then press ENTER.
ꢀ Press DISPLAY to view ID3-Tag information for
the MP3 file. If ID3-Tag information is not
present, [ID3-Tag: None] will appear. If you
select a folder, the number of subfolders and
number of MP3/WMA files in the folder are
displayed. Press DISPLAY again to remove the
information screen.
Tip:
By pressing SKIP > during Random playback, the
unit selects another track and resumes Random
playback.
MP3/WMA audio file requirement
ꢀ If you want to move to the upper directory, use
the v / V to highlight
and press ENTER.
File extensions
“.mp3”, “.wma”.
5. To stop playback at any time, press STOP.
Sampling frequency:
within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)
Bit rate:
within 8 - 320kbps (MP3), within 32 - 192kbps
(WMA)
CD-R Format:
ISO 9660 and JOLIET.
DVD R/RW Format:
ISO 9660 (UDF Bridge format)
Maximum Files/Disc:
Less than 1999 (total number of files and folders)
30
Photo List menu options
Viewing a JPEG File
1. Press v / V to select a file on the [Photo List]
menu then press ENTER.
The recorder can play JPEG files. Before playing
JPEG recordings, read “Photo file requirement” on
right.
The menu options appear.
The menu options displayed differ depending on
the selected media.
1. Press HOME.
The HOME menu appears.
2. Use v / V to select an option then press ENTER
2. Select [Photo] option.
to confirm your selection.
3. Select a media that contains JPEG file then press
ENTER.
ꢀ [Open] Opens the folder and a list of files in the
folder appears
The [Photo List] menu appears on the TV screen.
ꢀ [Full Screen] Shows the selected file as full
screen.
ꢀ [Slide Show] Displays Slide Show menu.
ꢀ [Delete] Deletes the selected file(s)/folder(s)
from the memory card. (page 32)
ꢀ [Copy] Copies the file(s) from a disc to a
memory card. (page 32)
Skip Images
While viewing a picture, press SKIP (.or >)
once to advance to the next file or return to the
previous file.
4. Use b / B / v / V to select a file, then press
ENTER.
The menu options appear on the left side of the
menu.
Rotate Images
Use v / V while viewing a picture to flip the picture
Tips:
ꢀ If you want to move to the upper directory, use the
clockwise or counterclockwise.
v / V to highlight
and press ENTER.
ꢀ You can select all files on the menu by pressing
CLEAR button. To cancel the selections, press
CLEAR again.
Photo file requirement
File extensions
“.jpg”
Selecting multiple files
1. Press MARKER.
Photo size:
Less than 4MB recommended
A check mark appears on the file. Press
MARKER again to cancel the marked file.
CD-R Format:
ISO 9660 and JOLIET.
2. Repeat step 1 to mark additional file.
5. Use v / V to select [Full Screen] then press
ENTER.
DVD R/RW Format:
ISO 9660 (UDF Bridge format)
The selected image is displayed in full screen.
Depending upon the size and number of JPEG
files, it could take a long time for the recorder to
read the files.
Maximum Files/Disc:
Less than 1999 (total number of files and folders)
Notes on JPEG file
Progressive and lossless compression JPEG image
files are not supported.
Press ENTER to appear or disappear this menu
during viewing the full screen.
6. To stop viewing at any time, press STOP.
The [Photo List] menu appears.
Tip:
If you press RETURN (O) while menu screen is
displaying, the screen is changed to TV viewing or AV
input.
31
View Slide Shows
1. Select [Slide Show] option on the [Photo List] menu
(Refer to “Photo List menu options” on page 31).
Copying a JPEG file(s) from a disc to a
memory card
1. Select a file you wish to copy on the menu.
2. Press ENTER.
2. Press ENTER.
The Slide Show menu appears.
The menu options appear on the menu.
3. Select [Copy] option then press ENTER.
Copy menu appears.
3. Use b / B / v / V to set the options.
[Object] option:
ꢀ [Selected] Views slide show only selected files.
Use the MARKER button to select multiple files.
ꢀ [All] Views slide show all files.
[Speed] option:
Sets the Slide Show speed to [Slow], [Normal], or
[Fast].
4. Select a memory card slot 1 or 2, if required.
5. You can select a album (folder) to copy.
1. After selecting a media then press ENTER.
The album (folder) list appears.
2. Select a folder.
4. Select the [Start] option then press ENTER to start
the Slide Show.
The slide show continues until you press STOP.
Also, you can create new album (folder). Select
[New Album] option on the Copy menu then
press ENTER.
5. Press STOP to stop the Slide Show and returns to
the Photo List menu.
“NONAME##” folder is created.
To Pause the Slide Show
1. Press PAUSE/STEP (X) to pause slide show.
6. Select [Copy] option then press ENTER to begin
copying.
2. When you want to continue slide show, press
PLAY (N).
Tip to select a file(s)
You can select all files on the menu by pressing
CLEAR button. To cancel the selections, press
CLEAR again.
Erasing a JPEG file(s)/folder(s) from the
memory card
Selecting multiple files
1. Press MARKER.
1. Select a file you wish to erase then press ENTER
on the menu.
A check mark appears on the file. Press MARKER
again to cancel the marked file.
The menu options appear on the menu.
2. Repeat step 1 to mark additional file.
2. Select [Delete] option then press ENTER.
The confirm message for deleting will appear.
3. Use b / B to select [Yes] then press ENTER.
The selected file(s) is deleted.
32
Notes for recording
Recording
About DVD recording
ꢀ The recording times shown are not exact because
the recorder uses variable bit-rate video
compression. This means that the exact recording
time will depend on the material being recorded.
ꢀ When recording a TV broadcast, if the reception is
poor or the picture contains interference, the
recording times may be shorter.
ꢀ If you record still pictures or audio only, the
recording time may be longer.
ꢀ The displayed times for recording and time
remaining may not always add up to exactly the
length of the disc.
Notes:
ꢀ This recorder cannot make recordings on CD-R or
CD-RW discs.
ꢀ Our company takes no responsibility for recording
failure due to power outages, defective discs, or
damage to the Recorder.
ꢀ Fingerprints and small scratches on a disc can
affect playback and/or recording performance.
Please take proper care of your discs.
ꢀ The recording time available may decrease if you
heavily edit a disc.
ꢀ If using a DVD-RW disc, make sure you change the
recording format (Video mode or VR mode) before
you record anything on the disc. See page 22
(Initialize) for how to do this.
Disc types and recording formats, modes,
and settings
This recorder can play five different kinds of DVD
discs: pre-recorded DVD-Video discs, DVD-RW,
DVD-R, DVD-RAM, DVD+RW and DVD+R discs. The
disc format for DVD-R, DVD+R, DVD+RW discs is
always “Video format”—the same as pre-recorded
DVD-Video discs. This means that once finalized, you
can play a DVD-R, DVD+R, or DVD+RW in a regular
DVD player. The DVD-RAM disc format is Video
Recording (VR) format.
By default, the DVD-RW disc format is Video format,
though you can change this to Video Recording (VR)
format, if required. (Reinitializing the disc will erase
the contents of the disc.)
ꢀ When using a DVD-R or DVD+R disc, you can keep
recording until the disc is full, or until you finalize the
disc. Before you start a recording session, check
the amount of recording time left on the disc.
ꢀ When using a DVD-RW disc in Video mode,
recording time available will only increase if you
erase the last title recorded on the disc.
ꢀ The Delete Title option in the Title List (Original)
menu only hides the title, it does not actually erase
the title from the disc and increase the recording
time available (except for the last recorded title on a
DVD-RW disc in Video mode).
The recording mode is closely related to the disc
format. If the disc format is Video Recording format,
then the recording mode is VR mode; if the disc
format is Video mode, then the recording mode is
Video mode (except for DVD-Video, which is not
recordable, and so does not have a recording mode).
Within the recording modes (which are fixed for them
whole disc) are the record settings. These can be
changed as required for each recording and
determine the picture quality and how much space the
recording will take up on the disc.
ꢀ Overwrite recording is available using DVD+RW
discs.
ꢀ
When using a DVD+R/RW, the recorder will execute
the Menu-making operation to update the new title
and editing when removing the disc from the recorder
or turn off the recorder.
Recording time and picture quality
There are four preset recording quality modes:
ꢀ XP – Highest quality setting, gives about
1 hour of recording time on a DVD (4.7GB).
ꢀ SP – Default quality, sufficient for most applications,
gives about 2 hours of recording time on a DVD
(4.7GB).
ꢀ LP – Slightly lower video quality, gives about 4 hour
of recording time on a DVD disc (4.7GB).
ꢀ EP – Lowest video quality, gives about 6 hour of
recording time on a DVD (4.7GB).
You may see a fragmented picture during playing
back the contents recorded in EP mode .
33
Copyright
Restrictions on copying
ꢀ Recording equipment should be used only for lawful
copying and you are advised to check carefully what
is lawful copying in the area in which you are
making a copy. Copying of copyright material such
as films or music is unlawful unless permitted by a
legal exception or consented to by the rights owner.
Some video material is copy-once protected: If you
want to record copy-once protected material to DVD,
you must use a VR mode DVD-RW disc compatible
with CPRM Ver. 1.1.
You can identify copy-once protected material during
playback by displaying disc information on-screen.
ꢀ This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only, unless otherwise
authorized by Macrovision corporation. Reverse
engineering or disassembly is prohibited.
ꢀ PAL format signals from the analog or the DV inputs
is not recorded correctly with this recorder.
ꢀ Video that is ‘copy-once only’ can only be recorded
using DVD-RW disc in VR mode or DVD-RAM disc
with CPRM (see below).
What is ‘CPRM’?
CPRM is a copy protection system (with scramble
system) only allowing the recording of ‘copy once’
broadcast programs. CPRM stands for Content
Protection for Recordable Media.
This Recorder is CPRM compatible, which means that
you can record copy-once broadcast programs, but
you cannot then make a copy of those recordings.
CPRM recordings can only be made on DVD-RW
discs formatted in VR mode or DVD-RAM discs, and
CPRM recordings can only be played on players that
are specifically compatible with CPRM.
ꢀ CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
THE ‘STANDARD DEFINITION’ OUTPUT. IF
THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL 525p
DVD RECORDER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
34
Basic Recording from a TV
Instant Timer Recording
Instant Timer Recording allows you to make a
recording easily of a preset length without using the
program timer.
Follow the instructions below to record a TV program.
Recording starts immediately and continues until the
disc is full or you stop the recording.
1. Follow steps 1-2 as shown left (Basic Recording
from a TV).
2. Press REC (z) repeatedly to select the recording
Note:
You must load a recordable disc for DVD recording.
time length.
1. Set a recording mode as necessary by pressing
REC MODE repeatedly. (XP, SP, LP, EP)
2. Use CH (+/-) buttons to select the TV channel to
record.
3. Use AUDIO to select the audio channel to record.
The table below shows what will be recorded on
the different settings for different types of
Recording starts after the first press.
Each subsequent press increases the recording
time within free space.
The recording time is displayed on the TV screen.
At the end of the recording, the recorder will stop
recording and shut off.
broadcast. The last column (Monitor Audio) shows
what you’ll hear as it is recording.
TV Broadcast Selected
Audio
Broadcast Audio Monitor
L Ch
MONO MONO
L
L
R
R Ch
Audio
MONO
STEREO
Left
MONO
STEREO
MONO
STEREO
Left
R
L
Checking the Recording Time
Press REC (z) once to check the recording time. The
recalled setting will automatically return to the TV
screen for a moment.
Also, remaining time of recording is shown in the
display window.
Right
R
Right
MONO
MONO+SAP MONO
SAP
MONO MONO
MONO MONO
MONO
MONO
SAP
STEREO
SAP
SAP
L
SAP
R
STEREO
+SAP
STEREO
SAP
SAP
SAP
To Extend the Recording Time
The recording time can be extended anytime by
pressing REC (z).
Each subsequent press increases the recording time
within free space.
MONO
MONO MONO
MONO
If you set the audio channel to SAP, but there is no
SAP channel being broadcast, the main audio
(mono or stereo) will be recorded.
4. Press REC (z) once.
Caution
Recording will start. (The REC indicator lights in
If the recorder is unplugged (or there is a power
failure) while the recorder is recording, the recording
will be lost.
the display window.)
ꢀ Recording continues until you press STOP (x)
or the disc is full.
ꢀ To record for a fixed length of time, see Instant
Timer Recording on right.
RAM
Playing while you are recording
You can start play from the beginning of the title while
continuing to record it.
5. Press STOP (x) to stop recording.
1. Press PLAY (N) while recording.
Start play of the title you are recording.
2. Press STOP (x) to return to the current recording
screen.
To Pause the Recording
1. Press PAUSE/STEP (X) to pause recording.
2. When you want to continue recording, press
PAUSE/STEP (X).
or
1. Press TIMESHIFT while recording.
The PIP(Picture-In-Picture) window appears on the
screen. What is currently being recorded appears
as a PIP and you will hear the playback audio.
You can change the main and sub picture by
pressing TIMESHIFT.
To record one TV program while
watching another
1. Press TV/DVD to select the TV mode during
recording. The TV indicator appears.
2. Press STOP (x) to return to the current recording
screen.
2. Using the TV, select the channel to be viewed.
Notes:
ꢀ Play cannot be started until at least 30 seconds
after recording starts.
ꢀ This function is not available during timer recording.
35
4. Enter the necessary information for your timer
recording(s).
Timer Recording
This recorder can be programmed to record up to 16
programs within a period of 1 month. For unattended
recording, the timer needs to know the channels to be
recorded, the starting and ending time.
ꢀ b / B (left/right) – move the cursor left/right
ꢀ v / V (up/down) – change the setting at the
current cursor position
ꢀ Press RETURN (O) to return to the [Timer
Record] list.
Note:
If you use a completely blank disc for timer recording,
you must format the disc before starting timer
recording. (Refer to “Initialize” on page 22.)
5. Press ENTER, the program will be memorized by
the recorder.
To check the programming, the [Timer Record] list
will appear.
[Check] field’s [Rec. OK] on the [Timer Record] list
indicates that the timer recording is programmed
correctly.
1. Press HOME and select [TV] option.
2. Press v / V to select [Timer Record] option then
press ENTER.
The [Timer Record List] will appear.
6. Press RETURN (O) to exit the [Timer Record]
3. Press v / V to select [New] option then press
ENTER.
list.
7. Make sure that you load a recordable disc for DVD
recording and press POWER to switch your unit to
Standby.
The [Timer Record] menu will appear.
Notes:
ꢀ The timer indicator lights in the display window
when the recorder is in standby with the timer
active. (Nothing is displayed while the [Power Save
Mode] is ON.)
ꢀ [Ch.] Choose a memorized channel number, or
one of the external inputs from which to record.
(You cannot select DV input.)
ꢀ You must press POWER to stop the timer recording.
ꢀ [Date] Choose a date up to 1 month in advance
or desired repeat (Monday ~ Friday, or Every
Sun~Sat).
ꢀ [Start Time] Set the start time.
ꢀ [End Time] Set the end time.
ꢀ [Mode] Choose a recording mode as necessary.
(XP, SP, LP, EP, or AT)
AT (Auto) mode determines how much disc time
is available and switches record mode, if
necessary, to complete recording the program.
36
If two or more timer programs overlap:
ꢀ The earlier program takes priority.
ꢀ When the earlier program finishes, the later
program starts.
ꢀ If two programs are set to start at exactly the same
time, the program entered first takes priority.
Checking Timer Recording
Details
Programming can be checked whenever the recorder
is turned on.
1. Press HOME and select [TV] option.
If the disc is damaged, the recording may not
complete successfully. In this case even though the
Check field shows “Rec. OK”, it may not be.
2. Press v / V to select [Timer Record] option then
press ENTER.
The [Timer Record List] will appear.
ꢀ Use v / V to select a timer recording.
Recording from an External
Input
ꢀ Press ENTER to edit the selected program.
Timer Record menu appears.
ꢀ Press CLEAR to delete the selected program
from the Timer Record List.
Recording from External Components
You can record from an external component, such as
a camcorder or VCR, connected to any of the
recorder’s external inputs.
1. Make sure that the component you want to record
from is connected properly to the recorder. See
page 16.
2. Press INPUT repeatedly to select the external
input to record from.
ꢀ Tuner: Built-in tuner
ꢀ AV1: AV IN 1 (AUDIO IN 1 / VIDEO IN 1)
mounted on back panel
ꢀ AV2: AV IN 2 (VIDEO, AUDIO (L/R), S-VIDEO
IN) mounted on front panel
Canceling a Timer Recording
You can clear a timer setting anytime before the
recording actually starts.
ꢀ DV: DV IN mounted on front panel
ꢀ Use v / V to select a program you want to erase on
the Timer Recorder List. If you want to erase the
program, press CLEAR.
3. Select the recording mode as necessary by
pressing REC MODE repeatedly. (XP, SP, LP, or
EP)
4. Press REC (z) once.
Stopping a Timer Recording in Progress
Recording will start. (The REC indicator lights in
the display window.)
After a timer recording has started, you can still
cancel the program.
ꢀ Press POWER.
ꢀ Recording continues until you press STOP (x)
or the disc is full.
ꢀ To record for a fixed length of time, see “Instant
Timer Recording” on page 35.
Timer Recording Troubleshooting
5. Press STOP (x) to stop recording.
Even though the timer is set, the recorder will not
record when:
ꢀ There is no disc loaded.
ꢀ A non-recordable disc is loaded.
ꢀ [Disc Protect] option is set to [ON] in the Setup
menu. (see page 23).
Note:
If your source is copy-protected using CopyGuard,
you will not be able to record it using this recorder.
See Copyright on page 34 for more details.
ꢀ Power is turned on.
ꢀ There are already 99 titles (DVD-RW, DVD-R,
DVD-RAM), 49 titles (DVD+R, DVD+RW) recorded
on the disc.
You cannot enter a timer program when:
ꢀ A recording is already underway.
ꢀ The time you’re trying to set has already passed.
ꢀ There are already 16 timer programs set.
37
1. Make sure your digital camcorder is connected to
the front panel DV IN jack. See page 16.
Recording from DV Input
Before DV dubbing
2. Check that the DV audio input is as you require.
You can choose between Audio 1 (original audio)
and Audio 2 (overdubbed audio).
You can connect a DV-equipped camcorder to this
recorder using a single DV cable for input and output
of audio, video, data and control signals.
ꢀ This recorder is only compatible with DV-format
(DVC-SD, DV25) camcorders. Digital satellite tuners
and Digital VHS video recorders are not compatible.
ꢀ You cannot connect more than one DV camcorder
at a time to this recorder.
ꢀ You cannot control this recorder from external
equipment connected via the DV IN jack (including
two recorders).
ꢀ It may not always be possible to control the
connected camcorder via the DV IN jack.
ꢀ Digital camcorders can usually record audio as
stereo 16-bit/48kHz, or twin stereo tracks of 12-
bit/32kHz. This recorder can only record one stereo
audio track. Set [DV Rec Audio] option to [Audio 1]
or [Audio 2] as required (see page 22).
ꢀ DV Input is set from the [DV Rec Audio] in
sub-menu of the Setup menu. See “DV
Recording Audio” on page 22 for more
information.
3. Press INPUT repeatedly to select the DV input.
DV appears in the display window and on the TV
screen.
4. Find the place on the camcorder tape that you
want to the recording to start from.
For best results, pause playback at the point from
which you want to record.
ꢀ Depending on your camcorder, you can use this
recorder’s remote to control the camcorder
using the STOP, PLAY and PAUSE functions.
5. Press REC (z) once to start recording.
ꢀ Audio input to the DV IN jack should be 32 or
48kHz (not 44.1kHz).
ꢀ Recording is automatically stopped if the
recorder detects no signal.
ꢀ You can pause or stop the recording by
pressing PAUSE/STEP (X) or STOP (x).
You cannot control the camcorder from this
remote control during recording.
ꢀ In Video mode, the final frame of the recording
may remain displayed on screen for a while
after recording stops.
ꢀ Picture disturbance on the recording may occur if
the source component pauses playback or plays an
unrecorded section of tape, or if the power fails in
the source component, or the DV cable becomes
disconnected.
Recording from a Digital Camcorder
You can record from a digital camcorder connected to
the DV IN jack on the front panel of this recorder.
Using the recorder’s remote, you can control both the
camcorder and this recorder.
Troubleshooting
If you cannot get a picture and/or audio through the
DV IN jack, check the bullet points:
Before recording, make sure that the audio input for
the DV IN jack is set up (see page 22).
ꢀ Make sure the DV cable is properly connected.
ꢀ Try switching off the connected equipment then
switch back on.
ꢀ Try switching the audio input.
Tips:
ꢀ The source signal must be DVC-SD format.
ꢀ Some camcorders cannot be controlled using this
recorder’s remote.
Note:
Depending on the connected camcorder, you may not
be able to control it using the remote control supplied
with this recorder.
ꢀ If you connect a second recorder using a DV cable,
you cannot control the second DVD from this one.
ꢀ You cannot control this unit remotely from a
component connected to the DV IN jack.
ꢀ You cannot record date and time information from a
DV cassette.
38
1 2
3 4
5
6
Editing
Title List and Chapter List Menu
Overview
Using the Title List menu you can edit video content.
The editing features available in the Title List menu
depend on whether you are editing video on DVD,
and whether you’re editing Original content, or a
Playlist.
There are two ways to edit VR mode DVD-RW discs.
You can directly edit the Original content of the disc,
or you can create and edit a Playlist. The Playlist
doesn’t actually change any of the content on the
disc, but just controls how the content is played back.
1. Press MENU/LIST to display the Title List menu.
Playback should be stopped when you do this.
1. Menu options: To display menu option, select a
title or chapter then press ENTER. The options
displayed differ depending on the disc type.
ꢀ [Combine] Combines two chapters into one
(page 44).
ꢀ You can also access it using HOME menu,
select [Movie] option then select [DISC] option
and press ENTER.
ꢀ [Delete] Deletes the title or chapter. (page 42)
ꢀ [Delete Part] Deletes a part of the Title (page
42).
ꢀ [Divide] Divides a title into two (page 44).
ꢀ [Full Play] Starts playback of the selected title
including the hidden chapters.
ꢀ [Hide (Show)] Hides (or Shows) the selected title
or chapter. (page 45)
ꢀ [Move] Moves a chapter on the Chapter List-
Playlist menu to a position on the menu. (page
45)
ꢀ [Play] Start playback of the selected title or
chapter. The hidden titles and chapters on the
DVD+R/RW cannot be play back.
ꢀ [Playlist Add] Adds the title or chapter to the
Playlist. (page 41)
ꢀ [Protect] Protects accidental recording, editing or
deleting of the title. (page 45)
ꢀ [Title Name] Edits the title name. (page 43)
ꢀ [Search]
ꢀ When selecting titles, use the v / V buttons to
display the previous/next page if there are more
than six titles.
ꢀ If you are editing a VR mode disc, press
MENU/LIST to switch between Original and
Playlist menu.
On the left side of the screen are the menu options.
The main part of the screen shows thumbnails of the
titles (or chapter) on the DVD. You can change these
thumbnails using the THUMBNAIL button—see
Changing Title Thumbnails on page 40.
Press DISPLAY to display the information of selected
title on the Title List menu.
After selecting a title or chapter on the Title List or
Chapter List menu, then press ENTER. The menu
options appears on the left side of the menu.
Use v / V to select a option then press ENTER to
confirm your selection.
- [Chapter]; Displays Chapter List of the Title.
- [Time]; Search time for you want start point
of the title. (page 43)
2. To exit the Title List menu, press RETURN (O)
repeatedly.
ꢀ [Title] Displays Title List of the chapter.
2. Indicates the disc name, record mode, free space,
and elapsed time progress bar.
3. Currently selected title.
4. Thumbnail
5. Shows the selected title number and total number
of titles.
6. Shows the title name, recorded date, and
recording length.
39
VR Mode: Original and Playlist
Editing
Adding Chapter Markers
VR
-RW
RAM
+RW
+R
Titles, Chapters and Parts
You can create chapters within a title by inserting
chapter marks at the desired points.
Titles in the disc’s original content contain one or
more chapters. When you insert a disc’s title into the
Playlist, all the chapters within that title also appear. In
other words, chapters in the Playlist behave exactly as
chapters on a DVD-Video disc do. Parts are sections
of Original or Playlist titles. From the Original and
Playlist menu you can add or delete parts. Adding a
chapter or title to the Playlist creates a new title made
up of a section (ie., chapter) of an Original title.
Deleting a part removes part of a title from the
Original or Playlist menu.
Note:
Chapter markers are inserted at regular intervals
automatically. You can change this interval from the
Initial Setup menu (see “Auto Chapter” on page 22).
During recording or playing back, at the point you
want to start a new chapter, press CHP ADD.
A chapter marker icon appears on the TV screen.
Caution
Changing Title Thumbnails
ꢀ When editing using the Delete, Add and Move
functions, the start and end frames may not be
exactly as set in the start and end point display.
ꢀ During Playlist playback, you may notice a
momentary pause between edits. This is not a
malfunction.
VR
-RW
RAM
+RW
+R
Each title displayed in the Title List menu is
represented by a thumbnail picture taken from the
start of that title or chapter.
Is editing a DVD like editing a video
tape?
No. When you edit a video tape you need one video
deck to play the original tape and another to record
the edits. With DVD, you edit by making a ‘Playlist’ of
what to play and when to play it. On playback, the
Recorder plays the disc according to the Playlist.
If you prefer, select a different still picture from within
a title.
Press THUMBNAIL to make the currently displayed
picture the one that appears in the Title List menu.
The still picture that you choose appears in both the
Original or Playlist menu.
Tip:
You can also change the thumbnail picture of the title
on the Chapter List menu. Select a chapter on the
Chapter List menu then press THUMBNAIL. The
thumbnail picture of the title that includes the chapter
is changed.
About word ‘Original’ and ‘Playlist’
VR
-RW
RAM
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
the edited version.
ꢀ Original: content refers to what’s actually recorded
on the disc.
ꢀ Playlist: content refers to the edited version of the
disc — how the Original content is to be played.
40
Making a New Playlist
Adding Additional Title/Chapters
VR
-RW
VR
-RW
RAM
RAM
to the Playlist
Use this function to add an Original title or chapter to
the Playlist. When you do this, the whole title is put
into the Playlist (you can delete bits you don’t need
later — see Deleting an Original or Playlist
title/chapter on page 42).
The title appears in the Playlist complete with the
chapter markers that appear in the Original. However,
if you add more chapter markers to the Original later,
these are not automatically copied over into the
Playlist title.
You can add an Original title or chapter to add to a
Playlist title even if it is already registered.
1. Choose a title or chapter on the Title List-Original
menu or Chapter List-Original menu to put into the
Playlist, then press ENTER.
The menu options appears on the left side of the
screen.
You can add up to 999 chapters to one disc . If you
only want to add a chapter of a title, use the Adding a
title/chapter to the Playlist on this page.
1. Choose a title or chapter on the Title List-Original
menu or Chapter List-Original menu to put into the
Playlist, then press ENTER.
The menu options appears on the left side of the
menu.
2. Use v / V to select [Playlist Add] from menu
options then press ENTER.
2. Use v / V to select [Playlist Add] option then press
ENTER.
3. Choose a Title List-Playlist that is already
registered to insert a title or chapter, then press
ENTER.
4. Repeat steps 1-3 to add additional title or chapter
on the Playlist.
You can view the added chapters on the Chapter
List-Playlist menu.
3. Select [New Playlist] then press ENTER.
The new title appears in the updated Playlist. All
chapters of the title are added to the Playlist.
5. Press RETURN (O) to exit, or MENU/LIST to go
back to the Title List-Original menu.
41
VR
-RW
RAM
Deleting an Original or Playlist
Title/Chapter
Deleting a Part
You can delete a part which you do not want in the
title.
When you erase a title or chapter from the Playlist
menu, you only remove it from the Playlist; the
title/chapter remains in the Original menu.
1. Use b / B / v / V to choose a title you want to
delete on the Title List menu then press ENTER.
The options appears on the left side of the menu.
If you choose to delete a title or chapter from the
Original (title/chapter) menu, the title or chapter is
actually deleted from the disc and the remaining time
available for recording increases. Titles/chapters
deleted from the Original are also removed from the
Playlist.
2. Select [Delete Part] option then press ENTER.
Edit (Delete Part) menu appears on the TV screen.
[Start Point] icon is highlighted.
Note:
It may not be possible to delete chapters that are less
than 5 seconds long.
1. Use b / B / v / V to choose a chapter or title you
want to delete on the Title List or Chapter List
menu then press ENTER.
3. Starts playback and use pause step, search and
slow-motion to find the starting point.
The menu options appears on the left side of the
screen.
4. Press ENTER at the starting point of the section
you want to delete.
2. Select [Delete] option from the options on the
menu.
‘End Point’ icon is highlighted.
The part is indicated on the Progress Bar.
5. Use pause step, search and slow-motion to find
the ending point.
6. Press ENTER at the ending point of the section
you want to delete.
You can cancel the selected point, use v / V to
select [Cancel] icon then press ENTER.
7. If you finish to edit, select [Done] icon then press
ENTER.
The confirm message for deleting will appear.
Use b / B to select [Yes] then press ENTER.
The selected part is deleted from the title and Title
List menu appears.
3. Press ENTER to confirm.
The confirm message for deleting will appear.
4. Use b / B to select [Yes] then press ENTER.
The selected chapter or title is deleted.
After pressing ENTER, the new, updated menu is
displayed.
Note:
It may not be possible to delete parts that are less
than 3 seconds long.
5. Repeat steps 1 - 4 to continue to delete from the
menu.
6. Press RETURN (O) repeatedly to exit the menu.
Notes:
ꢀ When DVD+RW recording, the deleted title’s name
is changed to ‘Deleted Title’.
ꢀ If more than two titles are repeatedly deleted, the
titles are combined into one.
ꢀ When you are deleting a title or chapter, only the
last one on DVD+RW increases remaining recording
time.
42
Naming a Title
Time Search
VR
Video
-RW
-RW
RAM +RW
-R
+R
You can name Original and Playlist titles independently.
Names can be up to 32 characters long.
You can select start point of the title.
1. Choose the title you want to name on the Title List
menu, then press ENTER.
1. Use b / B / v / V to choose a title on the Title List
menu then press ENTER.
The menu options appears on the left side of the
menu.
The options appears on the left side of the menu.
2. Select [Time] option then press ENTER.
[Search] menu appears on the TV screen.
2. Use v/V to select [Title Name] option then press
ENTER.
Keyboard menu appears.
3. Enter a name for the title. Use b / B / v / V to
select a character then press ENTER to confirm
your selection.
ꢀ Use MENU/LIST button to change keyboard
type.
ꢀ OK: Select to finish.
ꢀ Cancel: Cancels all entered characters.
ꢀ Space: Inserts a space at the cursor position.
ꢀ Delete: Deletes the previous character at the
cursor position.
Current picture
End time
Selected time
Selected point
Start time
ꢀ b / B: Moves cursor to left or right.
Tip:
Remote control buttons for entering a name
PLAY (N): Inserts a space at the cursor position.
3. Use b / B to find the point you want to start.
The point increase 1 minute step.
If you press and hold b / B then the point increase
5 minute step.
X (PAUSE/STEP): Deletes the after character at
the cursor position.
x (STOP), CLEAR: Deletes the previous
4. Press ENTER to start selected point.
character at the cursor position.
. / >: Moves cursor to left or right.
Numbers (0-9): Enters the corresponding
character at the cursor position.
4. Choose OK then press ENTER to fix the name
and return to the previous menu screen.
5. Press RETURN (O) repeatedly to exit the menu.
Notes:
ꢀ Names can be up to 32 characters long.
ꢀ For discs formatted on a different recorder, you will
see only a limited character set.
ꢀ When recording on DVD-R, DVD+R or DVD+RW
discs, the entered name is displayed on the DVD
player only after finalization.
43
Divide One Titles Into Two
+RW
Combining Two Chapters Into
One
VR
-RW
+RW
+R
RAM
Use this function to combine two adjacent Playlist or
Original chapters into one.
Use this command to split a title up into two new titles.
1. On the Title List menu, select a title you want to
divide then press ENTER.
Note:
This function is not available if there is only one
chapter within the title.
The menu options appears on the left side of the
screen.
2. Select [Divide] option.
1. On the Chapter List menu, select the second
chapter of the two chapters you want to combine
then press ENTER
The menu options appears on the left side of the
screen.
2. Use v / V to select [Combine] option.
The combine indicator appears between the two
chapters you want to combine.
3. Press ENTER.
Edit (Divide) menu appears. [Divide] option is
highlighted.
Current picture
3. Press ENTER.
The first title’s
thumbnail
The second title’s
thumbnail
4. Use play, pause step, search and slow-motion to
find the point you want to divide the title.
5. Select [Divide] option then press ENTER at the
point.
To reset the point, select [Cancel] option then
press ENTER. Repeat from step 3.
6. Choose [Done] option then press ENTER to fix the
dividing point.
The title is divided into two new titles. It take up to
4 minutes to divide.
Note:
You cannot select dividing point less than 3 seconds.
44
Tip
Moving a Playlist Chapter
If you select a hidden chapter or title on the Title List
or Chapter List menu, you can ‘show’ it by choosing
[Show] option on the menu. After doing that, you are
able to see the chapter or title.
VR
-RW
RAM
Use this function to re-arrange the playing order of
Playlist chapters on the Title List-Playlist menu.
Note:
Protect a Title
This function is not available if there is only one
chapter.
VR
-RW
+RW
+R
RAM
Use this function to protect against accidental
recording, editing or deleting of the title.
1. Select a chapter on the Chapter List-Playlist menu.
2. Press ENTER.
1. Press MENU/LIST to display the Title List menu.
The menu options appears on the left side of the
menu.
2. Use v V b B to choose a title you want to protect
then press ENTER.
3. Use v / V to select [Move] option from Playlist
Options appear on the left side of the screen.
options then press ENTER.
3. Select [Protect] from the options.
4. Use b / B / v / V to choose the place you want to
move the chapter to then press ENTER.
After pressing ENTER, the updated menu is
displayed.
4. Press ENTER to confirm.
The lock mark will appears on the title’s thumbnail.
Tip
If you select a title that has already been protected on
the Title List menu, you can ‘unprotect’ it by choosing
[Protect] option from the Title List menu options. After
doing that, you can edit and delete the title.
+RW
+R
Hide a Chapter/Title
You can skip playing chapters or titles without deleting
from the disc.
1. Use v V b B to choose a chapter or title you want
to hide on the Title List or Chapter List menu, then
press ENTER.
Options appear on the left side of the screen.
2. Select [Hide] option.
Example: Title List (DVD+RW)
3. Press ENTER to confirm.
The chapter’s or title’s thumbnail will dim.
45
2. Press TITLE in play or stop mode.
Reference
Title List menu will appear as shown below.
Tip
Additional Information
Overwriting Recording +RW
You can remove the Title List menu by pressing
STOP (x).
To overwrite a new video recording on a previously
recorded title, follow these steps. This feature is not
available for DVD+Rs, that always record at the end
of the Disc.
1. Select input source you want to record (TV
channel, AV1-2, DV).
2. Press MENU/LIST to display the Title List menu.
3. To play back a title, select the title you want then
press ENTER or PLAY (N).
Playing Your Recordings on Other DVD
Players (Finalizing a Disc)
Most regular DVD players can play finalized discs
recorded in Video mode, finalized DVD+R or
DVD+RWs. A small number of players can also play
DVD-RW discs recorded in VR mode, finalized or not.
Check the manual that came with the other player to
check what formats of discs it will play.
3. Use v V b B to choose a title you want to
overwrite.
4. Press REC (z) to start overwrite recording.
Overwrite recording starts from the start point of
the title.
Finalizing ‘fixes’ the recordings and editings in place
so that the disc can be played on a regular DVD
player or computer equipped with a suitable DVD-
ROM drive.
Finalizing a Video mode disc creates a menu screen
for navigating the disc. The menu can be accessed by
pressing MENU/LIST or TITLE.
5. Press STOP (x) to stop the overwrite recording.
The new title is created and updated menu is
displayed.
Notes:
ꢀ This function is not available for a protected title.
ꢀ If the overwrite is longer than the recording
length of the current title, the next title is
overwritten. But if next title is protected, the
overwriting stops at the starting point of the
title.
To finalize a disc, refer to “Finalize” on page 23.
Notes:
ꢀ Unfinalized DVD+RW is playable on regular DVD
players.
ꢀ If the selected title’s recording length is less than 10
seconds, the next title is overwritten. But if the next
title is protected, overwriting stops.
ꢀ The edited contents of a DVD+RW disc is
compatible on regular DVD players only after
finalization.
ꢀ Any edited contents of the DVD+R disc are not
compatible on regular DVD players. (Hide, chapter
combine, added chapter mark, etc.)
ꢀ How long finalization takes depends on the type of
disc, how much is recorded on the disc, and the
number of titles on the disc.
Viewing Title List menu displayed on
other DVD Recorders or Players
+RW
+R
You can view the Title List menu displayed on the
other DVD player that is capable of playing DVD+RW
or DVD+R discs.
ꢀ DVD+R DL disc can take up to 30 minutes to
finalize.
1. Insert DVD+R or DVD+RW disc recorded already.
46
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Tamil
Tatar
Hebrew
Hindi
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
8279
8285
8377
8365
7168
8382
8372
8378
8368
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Danish
Dutch
English
Esperanto
Estonian
Faroese
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Sindhi
Area Codes
Choose an area code from this list.
Area
Code
AF
AR
AU
AT
Area
Ethiopia
Fiji
Code
ET
FJ
Area
Code
MY
MV
MX
MC
MN
MA
NP
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Thailand
Turkey
Uganda
Code
SA
SN
SG
SK
SI
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
Finland
France
Germany
Great Britain
Greece
Greenland
Islands
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
FI
FR
DE
GB
GR
GL
HM
HU
IN
ID
IL
IT
JM
JP
BE
BT
ZA
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
KR
ES
LK
NL
NZ
NG
NO
OM
PK
PA
PY
PH
PL
SE
CH
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
KE
KW
LY
Kuwait
Libya
Luxembourg
PT
RO
LU
El Salvador
47
Code numbers of controllable TVs
If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.
Reference
Controlling Your TV with the
Supplied Universal Remote
Control
Manufacturer
ADMIRAL
AIWA
Code Number
Manufacturer
MONTGOMERY
WARD
Code Number
01,06,08,09
23,24,32,33,34
01,08,56
16,33,37,44,45
70
AKAI
01
NEC
AMARK
09
NOBLEX
07
You can control the sound level, input source, and
power switch of your LG TV with the supplied
Universal Remote Control.
AOC
01
PACKARD BELL
PANASONIC
PHILCO
43
BELL & HOWELL
BROKSONIC
CANDLE
33
07,11,13,25,35,36
01,06,07,08,09,
15,38,43,58
06,07,43,61,62,65
30
18,19
51
You can control your TV using the buttons below.
CCE
07
PHILIPS
CENTURION
CINERAL
CITIZEN
08
PIONEER
PORTLAND
PROSCAN
QUASAR
RADIO SHACK
RCA
43
09
49,50,51,52,53,54,55
03,37,44
CORONADO
CROWN
09
11,13
09
16,17,23
CURTIS MATHES
DAEWOO
DAYTRON
EMERSON
FISHER
01,03,08,33,35,37,44
16,38,39,40,41,42,43
01,08
01,03,37,44,69
16,17,23
REALISTIC
SAMPO
08
01,09,16,17,18,19
28,29
SAMSUNG
SANYO
01,08,09,25,68
28,29
FUNAI
46,47
SCOTT
01,08
TV Control
Buttons
GENERAL ELECTRIC
GRADIENTE
HITACHI
03,10,11,13,37,44
01,56,57,63,67
09,14,15,43
01,08,10,27,35
20,21,63,67
43
SEARS
09,25,26,27,28,29
64
SEMP
SHARP
09,22,23,24,60,66
01,06,08,09,10,
23,24,33,34
12,62,93
JC PENNEY
JVC
SIGNATURE 2000
KIOTE
SONY
KMC
09
SOUNDESIGN
SYLVANIA
51
KTV
01,08,09,31
01,07,08,09,35,39,40
33
01,04,05,06,07,
08,35,51
LG (GOLDSTAR)
LODGENET
LOGIK
SYMPHONIC
TATUNG
TEKNIKA
TELERENT
THOMSON
YORX
46,47
33
11
LXI
09,24,25,26,27,28,29
01,02,04,05,06,
07,08,09,20,
34,35,43,51,61,62,65
33
07,09,16,33,51
09,33
MAGNAVOX
69
08
MAJESTIC
TOSHIBA
WARDS
01,25,26,27,64
01,06,08,09,10,33,34
48
By pressing
POWER
You can
MARANTZ
01,32
MEMOREX
33
XR1000
Turn the TV on or off.
MGA/MITSUBISHI
01,08,32,34
ZENITH
01, 02,33,59
INPUT
Switch the TV’s input source
between the TV and other input
sources.
Notes:
•
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code.
CH +/–
Scans up or down through
memorized channels.
•
•
If you enter a new code number, the code number
previously entered will be erased.
VOL +/–
Adjust the volume of the TV.
When you replace the batteries of the remote, the code
number you have set may be reset to the default setting.
Set the appropriate code number again.
Note:
Depending on the unit being connected, you may not be able
to control your TV using some of the buttons.
Controlling other TVs with the
Universal Remote Control
You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is
listed in the table below, set the appropriate
manufacturer code.
1. While holding down TV POWER button, press the
number buttons to select the manufacturer code
for your TV (Refer to table on the right column).
2. Release TV POWER button.
48
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Solution
Symptom
No power.
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall
outlet securely.
No picture.
No sound.
ꢀ The TV is not set to receive recorder
signal output.
ꢀ
Select the appropriate video input mode
on the TV so the picture from the
recorder appears on the TV screen.
ꢀ The video cable is not connected
securely.
ꢀ Connect the video cable securely.
ꢀ The connected TV power is turned off. ꢀ Turn on the TV.
ꢀ The equipment connected with the
audio cable is not set to receive
recorder signal output.
ꢀ Select the correct input mode on the
audio receiver so you can listen to the
sound from the recorder.
ꢀ The audio cables are not connected
ꢀ Connect the audio cable securely.
securely.
ꢀ
The power of the equipment connected
with the audio cable is turned off.
ꢀ Turn on the equipment connected
with the audio cable.
ꢀ
The audio connecting cord is damaged.
ꢀ Replace it with new one.
The playback picture is
poor.
ꢀ The disc is dirty.
ꢀ Clean the disc.
The recorder does not
start playback.
ꢀ No disc is inserted.
ꢀ Insert a disc. (Check that the disc
indicator in the display window is lit.)
ꢀ An unplayable disc is inserted.
ꢀ The disc is placed upside down.
ꢀ
Insert a playable disc. (Check the disc
type, color system, and regional code.)
ꢀ Place the disc with the playback side
down.
ꢀ Place the disc on the disc tray
correctly inside the guide.
ꢀ The disc is not placed within the
guide.
ꢀ Clean the disc.
ꢀ The disc is dirty.
ꢀ Cancel the Rating function or change
the rating level.
ꢀ The Rating level is set.
ꢀ You cannot connect via this recorder.
Connect the component directly to
your TV.
The picture from the
external input is
distorted
ꢀ The video signal from the external
component is copy-protected.
ꢀ Use the CH. Add/Del feature to
restore channels. See [To Add or
Erase Channels] on page 18.
Some channels are
skipped over when
using CH (+/-).
ꢀ Those channels are not stored in the
recorder.
ꢀ Tighten connections or replace cable.
The picture or sound of
broadcasting channel is
weak or missing.
ꢀ Antenna or cables are loose.
ꢀ Turn camcorder on and operate
properly.
Camcorder image is not
shown.
ꢀ Camcorder is off.
ꢀ Use INPUT to select input channel
(AV1, AV2, DV, etc.)
Camcorder image via
A/V input or DV IN to
recorder is not shown
on TV screen.
ꢀ The recorder’s source is incorrect.
49
Cause
Solution
ꢀ Finalize the disc. (page 23)
ꢀ No solution.
Symptom
ꢀ
The disc was recorded in Video mode.
Cannot play a disc
recorded using this
recorder on another
player.
ꢀ Some players will not play even a
finalized disc recorded in Video mode.
ꢀ The disc was recorded in VR mode,
ꢀ The other player must be RW
compatible in order to play it.
ꢀ
Discs recorded with copy-once material
cannot be played on other players.
ꢀ No solution.
ꢀ The remaining blank space on the
disc is insufficient.
ꢀ Use another disc.
Cannot record or did
not record successfully.
ꢀ The source you are trying to record is
ꢀ You cannot record the source.
copy protected.
ꢀ
When setting the recording channel, the
channel is tuned on the TV’s own tuner.
ꢀ Select the channel on the recorder’s
built-in TV tuner.
ꢀ When recording to a Video mode disc,
programs that are copy-once
ꢀ Use a VR mode formatted disc for
copy-once material.
protected cannot be recorded.
Timer recording is not
possible.
ꢀ Clock in recorder is not set to correct
time.
ꢀ Set clock to correct time. See “Auto
Clock Set” or “Manual Clock Set” on
page 19.
ꢀ Timer has been programmed
incorrectly.
ꢀ Reprogram Timer. See “Timer
Recording” on page 36.
ꢀ Timer record indicator light does not
ꢀ Reprogram Timer.
appear after programming timer.
Stereo Audio Record
and/or Playback is not
present.
ꢀ TV is not Stereo-compatible.
ꢀ No solution.
ꢀ Broadcast program is not in stereo
format.
ꢀ No solution.
ꢀ The recorder A/V Out jacks are not
connected to TV A/V In jacks.
ꢀ Make A/V connections. Stereo is
available only via A/V output from the
recorder.
ꢀ The recorder Audio/Video Out is not
selected for viewing at the TV.
ꢀ Select AUX or A/V source as TV
input.
ꢀ The recorder’s TV audio channel is
set to mono.
ꢀ Set TV audio channel mode to Stereo.
See page 35.
ꢀ The remote control is not pointed at
the remote sensor of the recorder.
ꢀ Point the remote control at the remote
sensor of the recorder.
The remote control
does not work properly.
ꢀ The remote control is too far from the
recorder.
ꢀ Operate the remote control within
7 m.
ꢀ There is an obstacle in the path of the
ꢀ Remove the obstacle.
remote control and the recorder.
ꢀ The batteries in the remote control
ꢀ Replace the batteries with new ones.
are exhausted.
...you can reset the recorder as follows:
Resetting the recorder
ꢀ
Press and hold the POWER button for at least five
seconds. This will force the unit to power off then
turn the unit back on.
If you observe any of the following symptoms...
ꢀ
The unit is plugged in, but the power will not turn
on or off.
ꢀ
Unplug the power cord, wait at least five seconds,
and then plug it in again.
ꢀ
The front panel display is not working.
The recorder is not operating normally.
ꢀ
50
Specifications
General
Power requirements
AC 120 V, 60 Hz
Power consumption
Dimensions (approx.)
Mass (approx.)
22W
430 X 54 X 275 mm (w x h x d) without foot
4.1 kg
Operating temperature
Operating humidity
Television system
Recording format
5˚C to 35˚C
5 % to 90 %
NTSC color system
NTSC
Recording
Recording format
Recordable media
DVD Video Recording, DVD-VIDEO
DVD-ReWritable, DVD-Recordable, DVD+ReWritable,
DVD+Recordable, DVD+Recordable (Double Layer), DVD-RAM
DVD (4.7GB): Approx. 1 hour (XP mode), 2 hours (SP mode),
4 hours (LP mode), 6 hours (EP mode)
Recordable time
DVD+R DL (8.5GB): Approx. 2 hour (XP mode),
3 hours 40 minutes (SP mode), 7 hours 10 minutes (LP mode),
11 hours (EP mode)
Video recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
27MHz
MPEG 2 (VBR support)
48kHz
Dolby Digital
Playback
Frequency response
DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz
DVD (PCM 96 kHz): 8 Hz to 44 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 100 dB (AUDIO OUT connector)
Less than 0.008% (AUDIO OUT connector)
More than 95 dB (AUDIO OUT connector)
Inputs
ANTENNA IN
VIDEO IN
AUDIO IN
S-VIDEO IN
Antenna input, 75 ohms
1.0 Vp-p 75 ohms, sync negative, RCA jack x 2
2.0 Vrms more than 47 kohms, RCA jack (L, R) x 2
(Y) 1.0 V (p-p), 75 Ω, sync negative, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 Ω
DV IN
4 pin (IEEE 1394 standard)
Outputs
VIDEO OUT
S-VIDEO OUT
1 Vp-p 75 Ω, sync negative, RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, sync negative, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 Ω
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
19 pin (HDMI standard, Type A)
0.5 V (p-p), 75 Ω, RCA jack x 1
3 V (p-p), Optical connector x 1
HDMI video/audio output
Audio output (digital audio)
Audio output (optical audio)
Audio output (analog audio)
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
Accessory:
Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
RF Coaxial Cable . . . . . . . . . . . . . . . . . . . . . . . . .1
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Audio cable (L, R) . . . . . . . . . . . . . . . .1
Remote control . . . . . . . . . . . . . . . . . .1
ꢀ Design and specifications are subject to change without notice.
51
LG Electronics, Inc.
Limited Warranty - USA
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or
workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date
(“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original
purchaser of the product and effective only when used in the United States, excluding U.S. Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 days from the Date of Purchase.
Call 1-800-243-0000 for instructions on getting the
defective unit repaired or replaced.
PARTS: One Year from the Date of Purchase.
Please retain dated sales receipt and your box to
return the unit to LG for repair or replacement.
* Parts replaced are warranted for the remaining portion
of the original warranty period.
Shipping both ways will be paid by LG during the
Warranty Period. After the Warranty Period, you pay
inbound shipping charges and LG pays return shipping
charges.
Visit our website at: http://www.lgservice.com
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED
WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG
ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE
DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT
LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE
WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or
consequential damages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to
you. This warranty gives you specific legal rights and you may also have other rights that may vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
•
Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,
maintenance or failure to maintain, or separate system components; and
•
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside
environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,
lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or
voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer
software, institutional or commercial use, or other causes not arising out of defect in material or workmanship.
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For nearest Authorized Service Center, Where to buy,
Product Assistance, or Customer Assistance
Call 1-800-243-0000 (24 hours a day, 365 days per year)
and select appropriate options from the menu.
Or visit our website at http://www.lgservice.com
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
P/NO: 3834RD0087T
Issue O
ENGLEWOOD CLIFFS, NJ
Printed in Korea
|
Hyundai H TV2910SPF User Manual
Intel DZ68BC Desktop Motherboard BLKDZ68BC User Manual
JVC LT 26ED6SU User Manual
KitchenAid KECC507H User Manual
Lenovo L195 WIDE User Manual
Lincoln Impinger Conveyor Ovens 1451 User Manual
Mitsubishi Electronics Mitsubishi Digital Electronics Computer Hardware GT15 75ABUS2L User Manual
Numark Industries Convection Oven NDX 200 User Manual
Nvidia NFORCE 680I User Manual
Philips 29PT5304 User Manual