Nortel Networks Router BSR252 User Manual

BSR252_QIG_1.pdf 12/21/2006 10:24:58 AM  
Step 8  
Assign TCP/IP addresses  
15  
BusinBessSSec  
R
ure2Rou  
5
ter 252  
2
15. From the first Wizard window, choose the type of encapsulation and service  
that your ISP supplies. The wizard displays different windows for each type of  
encapsulation and service.  
8
8. Set up the IP addresses on each computer connected to the BSR252:  
a. Set each computer to dynamically obtain an IP address, or assign unique static  
IP addresses. If you choose to assign unique static IP addresses for each  
computer, choose IP addresses between 192.168.1.129 and 192.168.1.254.  
b. If you assign a static IP address in step 8a, assign a subnet mask of  
255.255.255.0 and a default gateway of 192.168.1.1.  
c. If you chose to dynamically obtain IP addresses in step 8a, you have an option  
of using Obtain a DNS server address automatically, or assigning the DNS  
server IP addresses.  
Quick Install Guide  
16. Depending on the type of encapsulation that your ISP  
uses, enter the following information:  
Detailed documentation for this Quick  
Installation Guide can be downloaded at  
16  
Steps 1 4  
Before you start  
PPP over ADSL (PPPoA)  
Enter the User Name and Password assigned by your ISP, and enter 100  
seconds in the Idle Timeout field. Click the Nailed-Up Connection option to  
keep the connection active. In the Network Address Translation list, select SUA  
Only.  
d. If you chose to assign unique static IP addresses in step 8a, you must assign  
DNS Server IP addresses.  
1. Contact your Internet Service Provider (ISP) to get the  
following information:  
RFC 1483  
a. Encapsulation type  
b. Multiplex Mode, VPI, VCI  
1
Enter the IP Address and Password assigned by your ISP. In the Network  
Address Translation list, select SUA Only.  
Steps 9 12  
Access the BSR252  
c. ISP IP addresses: WAN, DNS servers, Gateway, and WAN  
MAC address  
ENET ENCAP (Ethernet)  
If you have a dynamic WAN IP address, select Obtain an IP Address  
Automatically; otherwise, select Static IP Address and type your ISP assigned  
WAN IP address and the subnet mask in the fields provided. In the ENET  
ENCAP Gateway field, enter the gateway IP address given by your ISP.  
PPP over Ethernet (PPPoE)  
2. Get your Domain Name from the User  
Accounts dialog box in the Control Panel.  
For details, see your operating system Help  
files. Get your Computer Name from the  
System Properties dialog box on your  
computer.  
9. In the address field of your browser, enter  
192.168.1.1  
2
9
Enter the Service Name, User Name and Password assigned by your ISP, and  
enter 100 seconds in the Idle Timeout field. Click the Nailed-Up Connection  
option to keep the connection active.  
10. Enter the default  
user name (nnadmin)  
and password  
(PlsChgMe!) to log  
onto the BSR252.  
10  
C
M
3. (Optional) Get the IP addresses of DNS  
Steps 17 18  
Complete your configuration  
and remote servers on your LAN.  
3
Y
CM  
MY  
CY  
CMY  
K
InSstteapsll4th7e hardware  
17. Review your settings.  
11  
11. You can replace the default password (recommended)  
17  
or use it as it is.  
18. Click Save Settings.  
12. Replace the factory-default  
18  
certificate.  
12  
4
4. Mount the  
Steps 13 16  
Steps 19 20  
BSR252 on a wall,  
Start the wizard  
Testing your Internet  
or place it  
horizontally or vertically (using the supplied holder) on a flat surface.  
connection  
13  
5. Connect your PC and up to three other  
19  
computers or network devices to the four  
13. On the left  
navigation pane,  
click Wizard.  
5
19. To confirm the ADSL  
connection, click the  
Start Diagnose button.  
This test takes  
Ethernet ports.  
6. Connect your ADSL Internet service to the  
telephone port next to the Power LED.  
approximately 20  
6
seconds. If this test fails,  
confirm steps 1-18, and  
contact your service  
provider.  
7. Snap the appropriate power clip  
into the supplied power adapter.  
Connect the power adapter to the rear  
of the BSR252 and to an AC power  
source.  
7
14  
20  
14. In the General Setup window, enter the system name (your computer  
20. Test your connection to the Internet by opening your browser and  
name) and the domain name.  
visiting a known Web site.  
N0143490  
 

Milwaukee Work Light 49 24 0145 User Manual
New Buck Corporation Fan 20 Room Heater User Manual
Nikon Network Hardware UT 1 User Manual
Nortel Networks Projector MCP 11 FP10202 User Manual
Oki All in One Printer 2520 MFP User Manual
Omron Healthcare Scale HBF 306 User Manual
Oregon Scientific Heart Rate Monitor SH201 User Manual
Packard Bell Laptop GN45 User Manual
ParaBody Home Gym 445104 User Manual
Parker Products Network Card OEM650 User Manual