NETGEAR Network Card XWNB5201 User Manual

Powerline 500 WiFi Access Point (XWNB5201)  
Installation Guide  
 
Package Contents  
XWN5001  
XAV5201  
Ethernet cables (2)  
NETGEAR recommends  
that you do not plug a  
Powerline device directly  
into a power strip.  
2
 
 
Hardware Features  
Powerline 500 WiFi Access Point  
(XWN5001)  
Powerline 500 Adapter  
(XAV5201)  
Powerline  
LED  
Power  
LED  
Wireless  
LED  
Power  
LED  
Powerline  
LED  
Ethernet  
LED  
Security  
button  
Factory  
Reset  
button  
Ethernet  
port  
Ethernet  
LED  
On/Off  
switch  
3
 
 
LED Descriptions  
The LEDs indicate the status of your Powerline devices.  
When you plug in the Powerline device, the Power LED  
lights and turns green.  
The Ethernet LED  
lights and turns green when you connect  
a powered-on Ethernet device to at least one Ethernet port. If the  
LED is off, there is no Ethernet connection.  
The Wireless LED  
radio is on.  
lights and turns green when the wireless  
The Powerline LED lights when the Powerline device detects at  
least one other compatible Powerline device.  
The Pick A Plug feature lets you pick the electrical outlet with the  
fastest link rate.  
-
-
-
Green: Link rate > 80 Mbps (Fast)  
Amber: Link rate > 50 and < 80 Mbps (Medium)  
Red: Link rate < 50 Mbps (Slow)  
4
 
 
Button Descriptions  
The buttons on your Powerline devices let you do the following:  
Factory Reset button: Use the Factory Reset button to return your  
Powerline device to its default factory settings. Press the Factory  
Reset button for 2 seconds, and then release it.  
Power On/Off switch: Use the On/Off switch to turn the device on  
and off.  
Security button: The Security button has two functions:  
-
-
Secure the Powerline network.  
Automatically connect your wireless client to the XWN5001  
WiFi access point.  
5
 
 
Install the Adapters and Surf the Web with WiFi  
1. Secure your Powerline network.  
a. Make sure that the Power LED is solid green on each  
Powerline device.  
b. On the XAV5201 adapter, press the Security button for 2  
seconds, and then release the button. The Power LED  
blinks green while the adapter is setting up security.  
c. Within 2 minutes, press the Security button on the  
XWN5001 access point for 2 seconds, and then release the  
button.  
d. After a few seconds, the security is set and the Power LED  
turns solid green.  
6
 
 
The Powerline devices can communicate over the Powerline  
network in a secure way.  
2. Plug the XAV5201 into a wall outlet near your router or gateway.  
3. Connect the XAV5201 through the LAN port with an Ethernet  
cable.  
7
 
If you want to share Internet access across your home, make  
sure to connect the XAV5201 to your Internet gateway with an  
Ethernet cable.  
8
 
4. Plug the XWN5001 access point into a wall outlet where you  
need WiFi coverage.  
Note: You can connect an Ethernet-based device (like a game console,  
set-top box, or Blu-ray player) to the Internet and the home network with  
the additional Ethernet port on the XWN5001.  
9
 
5. Set up WiFi access on your XWN5001 access point.  
You can set up WiFi access on your XWN5001 access point in  
one of two ways:  
Option 1: Use NETGEAR genie to manually configure the  
wireless settings of your XWN5001 access point.  
a. Install NETGEAR genie. (See Install NETGEAR genie on  
page 18.)  
b. Temporarily connect your computer directly to the  
XWN5001 through the Ethernet port.  
c. Launch NETGEAR genie on your computer and click  
Network Map or select it from the menu.  
10  
 
d. Click the Powerline icon on the Network Map screen.  
The Powerline Utility screen displays:  
Powerline  
icon  
XWN5001  
icon  
e. On the Powerline Utility screen, right-click the XWN5001  
icon.  
11  
 
f. From the pop-up menu that displays, select Wireless  
configuration.  
g. Enter the following wireless settings:  
Wireless Network Name (SSID)  
Wireless Security Type  
Passphrase  
12  
 
If you want to clone your existing wireless network, enter  
the same wireless settings that your router or gateway  
uses. When you are roaming in your house, your wireless  
client (laptop, tablet, or smartphone) switches from one  
network (router or gateway) to the other (XWN5001),  
depending on the signal quality.  
If you want to create a new wireless network, enter new  
wireless settings. Creating a new wireless network lets  
you have a second network in another zone of your  
house.  
h. Click Apply to save your changes.  
i. When you are finished with the wireless settings,  
disconnect the Ethernet cable from the XWN5001.  
Note: You can access advanced wireless  
settings by right-clicking the device  
icon and selecting the IP address on  
the pop-up menu. The login and  
password are admin and password.  
13  
 
Option 2: Use the web browser setup guide to manually  
configure the wireless settings of your XWN5001 access  
point.  
On your computer or wireless device (tablet, smartphone):  
a. Open the software that manages  
your wireless network connections  
and connect to the XWN5001  
network.  
Tip: The default wireless network name (SSID)  
of the XWN5001 is NETGEAR_EXT.  
The default network key (wireless security  
password) is printed on the back of the  
XWN5001.  
14  
 
b. On the same computer or wireless device, open a web  
browser window.  
The browser takes you directly to the onscreen setup  
guide. If it does not, enter one of the following into the  
browser address bar:  
c. When prompted to log in, enter:  
User name: admin  
Password: password  
The web browser setup guide helps you configure the  
wireless settings of the XWN5001.  
15  
 
If you want to clone your existing wireless network, enter  
the same wireless settings that your router or gateway  
uses.  
If you want to create a new wireless network, enter new  
wireless settings. Creating a new wireless network lets  
you have a second network in another zone of your  
house.  
Record the new wireless settings here:  
Wireless network name (SSID)  
Network key (Passphrase)  
16  
 
6. Connect your wireless client (laptop, tablet, or smartphone) to  
the XWN5001 for Internet access.  
Option 1: Use the WPS button on your wireless client to  
automatically connect to the XWN5001 access point.  
a. Press and hold the Security button on the XWN5001 for  
2 seconds and release it.  
The Wireless LED starts to blink.  
b. Press the WPS button on your wireless client for 2  
seconds and release it.  
When the Wireless LED stops blinking, your wireless  
client is automatically connected to the XWN5001 access  
point and you can surf the web.  
Option 2: Manually connect to the XWN5001 access point.  
On your computer or wireless client (tablet, smartphone):  
a. Open the software that manages your wireless network  
connections.  
b. Connect to the XWN5001 wireless network (SSID).  
c. Enter the network key (passphrase).  
Your wireless device is now connected to the XWN5001  
access point and you can surf the web.  
17  
 
Install NETGEAR genie  
Follow these instructions to download and install NETGEAR genie on  
your computer.  
1. Type http://support.netgear.com into your browser address  
bar.  
2. Click the For Home button.  
3. In the search box, type xwn5001.  
4. Download the NETGEAR genie that corresponds to your OS  
environment (Windows or Mac).  
5. Run the file that you downloaded and follow the onscreen  
instructions to install NETGEAR genie.  
18  
 
 
Compatible NETGEAR Powerline Devices  
Your Powerline devices can share a Powerline network with  
these compatible NETGEAR devices: XAVB1301, XAVB1401,  
XAVB2101, XAVB2602, XAVNB2001, XAVB5601, XAVB5101,  
XAVB5201, XAVB5602, XAUB2511, XAVB5004, XAVB1004,  
XWNB5602, and XWNB1601.  
For a complete list of HomePlug AV certified devices, visit  
19  
 
 
Safety Information  
AC input: 100–240V, 250 mA or 0.25A (max.)  
Operating temperature: 0°C–40°C  
User Manual  
You can get the user manual online at  
http://downloadcenter.netgear.com or through a link in the product’s user  
interface.  
Compliance  
For the complete EU Declaration of Conformity, visit   
This symbol appears in accordance with the European Union  
Directive 2002/96 on the Waste Electrical and Electronic  
Equipment (the WEEE directive). If you dispose of this product in  
the European Union, treat and recycle it in accordance with your  
jurisdiction’s laws that implement the WEEE directive.  
For indoor use only in all EU countries and in Switzerland.  
 
NETGEAR, Inc.  
350 East Plumeria Drive  
San Jose, CA 95134, USA  
October 2012  
 

Miele Clothes Dryer T 4809 Ci User Manual
Nady Systems Portable Stereo System RPA6 User Manual
Navman Satellite Radio 7000 User Manual
Nortel Networks Telephone P0936571 02 User Manual
NuTone Air Conditioner 605RP User Manual
One for All TV Video Accessories 706082 User Manual
Oster Convection Oven Oster Countertop Convection Oven User Manual
Panasonic Fax Machine DP 8025 User Manual
Panasonic Telephone KX T2395D W User Manual
Panasonic Wheelchair ER2031 2051 User Manual